Return to supplier page
Epilox® Hardener M 715 by Leuna Harze is a modified cycloaliphatic polyamine in aqueous solution. Acts as an emulsifying hardener. Offers very good surface properties. In combination with liquid epoxy resins, e.g. Epilox T 19-32/1000, Epilox T 19-38/700 or Epilox M 711 is preferably used as binder for water dilutable coatings. Modified cycloaliphatic polyamine epoxide adduct. Acts as a curing agent. Has very good smooth and good surface properties. Offers higher reactivity in comparison to Epilox-hardener H 10-33 and low yellowing tendency. Used for manufacturing of industrial floors (primers, coatings, screeds) as well as for mortars. Low viscosity, solventless polyaminoamide epoxide adduct. Acts as a curing agent for solventless or low solvent epoxy paint systems and coatings. Cured formulations give tack-free surfaces. Offers good through-curing at low temperature. Polyamide epoxide adduct as solution in xylene/butanol. Acts as a curing agent in varnish and coating resin systems. Useful for maintenance coatings, marine paint primers and enamel paint formulations. Modified polyamide solution in 85% xylene. Acts as a curing agent in varnish and coating resin systems for processing temperatures down to + 10 °C. Is useful for the formulation of paints with high solid contents. Modified cycloaliphatic polyamine epoxide adduct. Acts as a curing agent. Surfaces are tack-free and show good resistance to light and weather. The hardener may be combined with Epilox T 19- 34/700 (100 pbw resin : 50 pbw hardener) giving good mechanical properties of cured formulations. Has a prolonged pot life in comparison to Epilox-hardener M 789. Modified cycloaliphatic polyamine epoxide adduct. Acts as a curing agent with improved uv stability. Has very good smooth and good surface properties. Used for the building industry, for manufacturing of industrial floors (primers, coatings, screeds) as well as for mortars. Modified cycloaliphatic polyamine epoxide adduct. Acts as a curing agent. Has very good smooth and good surface properties. Used for the building industry, for manufacturing of industrial floors (primers, coatings, screeds) as well as for mortars. An activated, modified, cycloaliphatic polyamine. Acts as a high reactivity curing agent and/or accelerator for aminic hardeners. Has good surface properties. Thick layer coatings and castings with sufficient volume are applicable at temperatures down to + 5 °C. Low viscosity, modified cycloaliphatic polyamine. Acts as a hardener for impregnating and priming concrete. In combination with Epilox resins it is used for highly filled coating materials and mortars for processing temperatures above + 15 °C. Used in nonylphenol-free coatings.
Epilox®
Coating ingredients supplied by Leuna Harze