Return to supplier page
Induprint PAC 357 by Indulor is an amine free carboxylated methacrylate-based aqueous solution polymer. It offers high alkali resistance, excellent resolubility, low odor and good transfer. It is anionic in nature and shows freeze/thaw stability. Induprint PAC 357 is used as let-down vehicle for water-based flexographic and gravure-printing inks (for gift wrapping, tissue, and wallpaper). Induprint SE 8760 by Indulor is an ammoniacal resin solution. It acts as a binder for glossy water-based overprint varnishes and endless press/calendering varnishes. It offers good block resistance, excellent gloss after calendering & release properties, and good resolubility. It is anionic in nature and shows excellent transfer & freeze-thaw stability. Induprint SE 8760 is suitable for use as a let-down vehicle for flexographic and gravure-printing inks. Induprint PAC 4206 H by Indulor is an aqueous solution polymer based on methyl methacrylate, carboxylate. It provides excellent resolubility, high water & alkali resistance and good transfer. It is anionic in nature and offers freeze/thaw stability. It is free of solvents and contains 3% Dowanol DPM as coalescing agent. Induprint PAC 4206 H is used in water-based flexographic and gravure-printing inks (for gift wrapping, tissue, and wallpaper). Induprint SE 905 by Indulor is an anionic emulsion polymer based on styrene and acrylates. It acts as a binder for water-based overprint varnishes. Provides fast drying, freeze/thaw stability and flat dilution curve. It is free of glycols or glycol ethers. Induprint SE 905 is recommended for water-based flexographic and gravure-printing inks. Induprint PAC 6651 by Indulor is a methacrylate based emulsion polymer. It is anionic in nature and offers low odor and high viscosity. It shows excellent alkali resistance. Induprint PAC 6651 is suitable for water-based flexographic and gravure printing inks (i.e. for tissue) in combination with hydrosols of Induprint PAC 4201 S. Induprint PAC 319 by Indulor is a hard, anionic, high-hiding styrene-acrylic copolymer emulsion. It increases color intensity and offers excellent resolubility, printability, and fast drying. It exhibits freeze-thaw stability. Induprint PAC 319 is used in printing inks and overprint varnishes. Induprint SE 1962 by Indulor is an anionic styrene and acrylate based soft emulsion polymer. It provides high gloss and excellent flexibility. It shows excellent heat seal resistance and freeze-thaw stability. It acts as a binder for glossy water-based overprint varnishes (cardboard for pre-print application). Induprint SE 1962 is suitable for water-based flexographic and gravure-printing inks (for labels, pre-print, and post-print). Induprint PAC 2816 by Indulor is an anionic carboxylated acrylate emulsion polymer. It offers excellent transfer, good printability, excellent color strength development and flat dilution curve. Induprint PAC 2816 is used as let-down vehicle for water-based flexographic and gravure-printing inks such as corrugated board, cardboard, and paper bags. Induprint SE 5713 by Indulor is a medium hard emulsion polymer based on styrene and acrylates. It acts as a binder for glossy water-based overprint varnishes. It is anionic in nature and shows film forming at room temperature. Offers excellent gloss, freeze/thaw stability and high blocking resistance. Induprint SE 5713 is used as let-down vehicle for water-based flexographic and gravure-printing inks. Induprint SE 4032 by Indulor is a methacrylates-based emulsion polymer. It is anionic in nature and offers freeze/thaw stability. It acts as a binder for glossy water-based overprint varnishes. It exhibits excellent solvent and chemical resistance and high resistance to plasticizer migration. Offers good adhesion to variety of substrates (PVC). Induprint SE 4032 is suitable as let-down vehicle for flexographic and gravure-printing inks.
Induprint
Coating ingredients supplied by Indulor