Supplier Page
Ashland
OverviewProducts425Brands36Products families36News2

Culminal™ (Coating ingredients)

Supplied by Ashland

85 Products match your search

Culminal™ MHEC 15000 PFR

by Ashland

Culminal™ MHEC 15000 PFR by Ashland is a water-soluble, non-ionic cellulose ether. It is used to give water retention in water-based paints and varnishes, to control rheology and consistency of water-based paints, to stabilize pigments and fillers, as a binding and viscosity control agent in enamels, as a thickener of printing inks, and in textile coatings. It can be used as a protective colloid, suspending agent, binder, and stabilizer. It offers good temperature stability and compatibility with many materials including surfactants and polymers such as CMC, starch, guar, and alginates. It is also used to control in-can consistency, flow and leveling, high shear viscosity, and storage stability of interior and exterior flat emulsion paints. Culminal™ MHEC 15000 PFR shows delayed solubility.
See the product

Culminal™ FS1550

by Ashland

Culminal™ FS1550 by Ashland is a modified methylcellulose derivative. It is used for fast-setting tile cement based on CA and CSA cement. It offers an all-in-one rheology solution for fast-setting tile cement, eliminating the need for co-thickeners. It is suitable for floor and wall applications.
See the product

Culminal™ UP 3010

by Ashland

Culminal™ UP 3010 by Ashland is a modified methylcellulose derivative. It provides visual open time, tensile strength development under varying storage conditions, and improved contact between tiles or insulation boards. It ensures low impact on cement hydration, supporting fast hydration and high early-phase strength performance.
See the product

Culminal™ C8713

by Ashland

Culminal™ C8713 by Ashland is a methylcellulose derivative based on nonionic cellulose ether. Acts as a rheology modifier and is suitable for a variety of industrial applications. Used in cementitious adhesives, gypsum plasters and fillers, joint compounds, renders and skim coats, self-levelling underlayments and floor screeds, and many more.<br> <ul style="padding-left: 40px;"><li>Provides water retention, workability and cohesiveness to mixtures.</li> <li>Used to control thickening, water demand, open time, sag resistance, strength and other important properties of the final product.</li> <li>It helps to build materials to be applied more easily and perform better.</li> <li>Also, available with retarded hydration to allow use in ready-to-use building materials.</li> <li>Culminal™ C8713 complies with the SARA 311/312 Hazards, AUSTR (Australia), DSL (Canada), IECSC (China), ENCS (Japan), KECL (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) inventories and 29 CFR 1910.1200 (OSHA HazCom 2012) regulation.</li></ul>
  • Sustainable option
See the product

Culminal™ C4280 M44

by Ashland

Culminal™ C4280 M44 by Ashland is a methylcellulose derivative based on nonionic cellulose ether. Acts as a rheology modifier and is suitable for a variety of industrial applications. Used in cementitious adhesives, gypsum plasters and fillers, joint compounds, renders and skim coats, self-levelling underlayments and floor screeds, and many more.<br> <ul style="padding-left: 40px;"><li>Provides water retention, workability and cohesiveness to mixtures.</li> <li>Used to control thickening, water demand, open time, sag resistance, strength and other important properties of the final product.</li> <li>It helps to build materials to be applied more easily and perform better.</li> <li>Also, available with retarded hydration to allow use in ready-to-use building materials.</li> <li>Culminal™ C4280 M44 complies with the SARA 311/312 Hazards, AUSTR (Australia), DSL (Canada), IECSC (China), ENCS (Japan), KECL (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) inventories and 29 CFR 1910.1200 (OSHA HazCom 2012) regulation.</li></ul>
  • Sustainable option
See the product

Culminal™ C8681

by Ashland

Culminal™ C8681 by Ashland is a methylcellulose derivative based on nonionic cellulose ether. Acts as a rheology modifier and is suitable for a variety of industrial applications. Used in cementitious adhesives, gypsum plasters and fillers, joint compounds, renders and skim coats, self-levelling underlayments and floor screeds, and many more.<br> <ul style="padding-left: 40px;"><li>Provides water retention, workability and cohesiveness to mixtures.</li> <li>Used to control thickening, water demand, open time, sag resistance, strength and other important properties of the final product.</li> <li>It helps to build materials to be applied more easily and perform better.</li> <li>Also, available with retarded hydration to allow use in ready-to-use building materials.</li> <li>Culminal™ C8681 complies with the SARA 311/312 Hazards, AUSTR (Australia), DSL (Canada), IECSC (China), ENCS (Japan), KECL (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) inventories and 29 CFR 1910.1200 (OSHA HazCom 2012) regulation.</li></ul>
  • Sustainable option
See the product

Culminal™ MHPC 500 PF

by Ashland

Culminal™ MHPC 500 PF by Ashland is a methylcellulose derivative based on nonionic cellulose ether. Acts as a rheology modifier and is suitable for a variety of industrial applications. Used in cementitious adhesives, gypsum plasters and fillers, joint compounds, renders and skim coats, self-levelling underlayments and floor screeds, and many more.<br> <ul style="padding-left: 40px;"><li>Provides water retention, workability and cohesiveness to mixtures.</li> <li>Used to control thickening, water demand, open time, sag resistance, strength and other important properties of the final product.</li> <li>It helps to build materials to be applied more easily and perform better.</li> <li>Also, available with retarded hydration to allow use in ready-to-use building materials.</li> <li>Culminal™ MHPC 500 PF complies with the SARA 311/312 Hazards, AUSTR (Australia), DSL (Canada), IECSC (China), ENCS (Japan), KECL (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) inventories and 29 CFR 1910.1200 (OSHA HazCom 2012) regulation.</li></ul>
See the product

Culminal™ MHPC 20000 S

by Ashland

Culminal™ MHPC 20000 S by Ashland is a methylcellulose derivative based on nonionic cellulose ether. Acts as a rheology modifier and is suitable for a variety of industrial applications. Used in cementitious adhesives, gypsum plasters and fillers, joint compounds, renders and skim coats, self-levelling underlayments and floor screeds, and many more.<br> <ul style="padding-left: 40px;"><li>Provides water retention, workability and cohesiveness to mixtures.</li> <li>Used to control thickening, water demand, open time, sag resistance, strength and other important properties of the final product.</li> <li>It helps to build materials to be applied more easily and perform better.</li> <li>Also, available with retarded hydration to allow use in ready-to-use building materials.</li> <li>Culminal™ MHPC 20000 S complies with the SARA 311/312 Hazards, AUSTR (Australia), DSL (Canada), IECSC (China), ENCS (Japan), KECL (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) inventories and 29 CFR 1910.1200 (OSHA HazCom 2012) regulation.</li></ul>
See the product

Culminal™ MHPC 100

by Ashland

Culminal™ MHPC 100 by Ashland is a methylcellulose derivative based on nonionic cellulose ether. Acts as a rheology modifier and is suitable for a variety of industrial applications. Used in cementitious adhesives, gypsum plasters and fillers, joint compounds, renders and skim coats, self-levelling underlayments and floor screeds, and many more.<br> <ul style="padding-left: 40px;"><li>Provides water retention, workability and cohesiveness to mixtures.</li> <li>Used to control thickening, water demand, open time, sag resistance, strength and other important properties of the final product.</li> <li>It helps to build materials to be applied more easily and perform better.</li> <li>Also, available with retarded hydration to allow use in ready-to-use building materials.</li> <li>Culminal™ MHPC 100 complies with the SARA 311/312 Hazards, AUSTR (Australia), DSL (Canada), IECSC (China), ENCS (Japan), KECL (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) inventories and 29 CFR 1910.1200 (OSHA HazCom 2012) regulation.</li></ul>
See the product

Culminal™ MHPC 20000 P

by Ashland

Culminal™ MHPC 20000 P by Ashland is a methylcellulose derivative based on nonionic cellulose ether. Acts as a rheology modifier and is suitable for a variety of industrial applications. Used in cementitious adhesives, gypsum plasters and fillers, joint compounds, renders and skim coats, self-levelling underlayments and floor screeds, and many more.<br> <ul style="padding-left: 40px;"><li>Provides water retention, workability and cohesiveness to mixtures.</li> <li>Used to control thickening, water demand, open time, sag resistance, strength and other important properties of the final product.</li> <li>It helps to build materials to be applied more easily and perform better.</li> <li>Also, available with retarded hydration to allow use in ready-to-use building materials.</li> <li>Culminal™ MHPC 20000 P complies with the SARA 311/312 Hazards, AUSTR (Australia), DSL (Canada), IECSC (China), ENCS (Japan), KECL (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) inventories and 29 CFR 1910.1200 (OSHA HazCom 2012) regulation.</li></ul>
See the product
Showper page

Most Popular Brands

Culminal™

by Ashland

85 products
See All Products

Blanose™

by Ashland

51 products
See All Products

Strodex™

by Ashland

48 products
See All Products

Drewplus™

by Ashland

46 products
See All Products