Return to supplier page
Culminal™ MHEC 15000 PFR by Ashland is a water-soluble, non-ionic cellulose ether. It is used to give water retention in water-based paints and varnishes, to control rheology and consistency of water-based paints, to stabilize pigments and fillers, as a binding and viscosity control agent in enamels, as a thickener of printing inks, and in textile coatings. It can be used as a protective colloid, suspending agent, binder, and stabilizer. It offers good temperature stability and compatibility with many materials including surfactants and polymers such as CMC, starch, guar, and alginates. It is also used to control in-can consistency, flow and leveling, high shear viscosity, and storage stability of interior and exterior flat emulsion paints. Culminal™ MHEC 15000 PFR shows delayed solubility. Culminal™ FS1550 by Ashland is a modified methylcellulose derivative. It is used for fast-setting tile cement based on CA and CSA cement.
It offers an all-in-one rheology solution for fast-setting tile cement, eliminating the need for co-thickeners.
It is suitable for floor and wall applications. Culminal™ UP 3010 by Ashland is a modified methylcellulose derivative. It provides visual open time, tensile strength development under varying storage conditions, and improved contact between tiles or insulation boards. It ensures low impact on cement hydration, supporting fast hydration and high early-phase strength performance. Culminal™ C8713 by Ashland is a methylcellulose derivative based on nonionic cellulose ether. Acts as a rheology modifier and is suitable for a variety of industrial applications. Used in cementitious adhesives, gypsum plasters and fillers, joint compounds, renders and skim coats, self-levelling underlayments and floor screeds, and many more.<br>
<ul style="padding-left: 40px;"><li>Provides water retention, workability and cohesiveness to mixtures.</li>
<li>Used to control thickening, water demand, open time, sag resistance, strength and other important properties of the final product.</li>
<li>It helps to build materials to be applied more easily and perform better.</li>
<li>Also, available with retarded hydration to allow use in ready-to-use building materials.</li>
<li>Culminal™ C8713 complies with the SARA 311/312 Hazards, AUSTR (Australia), DSL (Canada), IECSC (China), ENCS (Japan), KECL (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) inventories and 29 CFR 1910.1200 (OSHA HazCom 2012) regulation.</li></ul> Culminal™ C4280 M44 by Ashland is a methylcellulose derivative based on nonionic cellulose ether. Acts as a rheology modifier and is suitable for a variety of industrial applications. Used in cementitious adhesives, gypsum plasters and fillers, joint compounds, renders and skim coats, self-levelling underlayments and floor screeds, and many more.<br>
<ul style="padding-left: 40px;"><li>Provides water retention, workability and cohesiveness to mixtures.</li>
<li>Used to control thickening, water demand, open time, sag resistance, strength and other important properties of the final product.</li>
<li>It helps to build materials to be applied more easily and perform better.</li>
<li>Also, available with retarded hydration to allow use in ready-to-use building materials.</li>
<li>Culminal™ C4280 M44 complies with the SARA 311/312 Hazards, AUSTR (Australia), DSL (Canada), IECSC (China), ENCS (Japan), KECL (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) inventories and 29 CFR 1910.1200 (OSHA HazCom 2012) regulation.</li></ul> Culminal™ C8681 by Ashland is a methylcellulose derivative based on nonionic cellulose ether. Acts as a rheology modifier and is suitable for a variety of industrial applications. Used in cementitious adhesives, gypsum plasters and fillers, joint compounds, renders and skim coats, self-levelling underlayments and floor screeds, and many more.<br>
<ul style="padding-left: 40px;"><li>Provides water retention, workability and cohesiveness to mixtures.</li>
<li>Used to control thickening, water demand, open time, sag resistance, strength and other important properties of the final product.</li>
<li>It helps to build materials to be applied more easily and perform better.</li>
<li>Also, available with retarded hydration to allow use in ready-to-use building materials.</li>
<li>Culminal™ C8681 complies with the SARA 311/312 Hazards, AUSTR (Australia), DSL (Canada), IECSC (China), ENCS (Japan), KECL (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) inventories and 29 CFR 1910.1200 (OSHA HazCom 2012) regulation.</li></ul> Culminal™ MHPC 500 PF by Ashland is a methylcellulose derivative based on nonionic cellulose ether. Acts as a rheology modifier and is suitable for a variety of industrial applications. Used in cementitious adhesives, gypsum plasters and fillers, joint compounds, renders and skim coats, self-levelling underlayments and floor screeds, and many more.<br>
<ul style="padding-left: 40px;"><li>Provides water retention, workability and cohesiveness to mixtures.</li>
<li>Used to control thickening, water demand, open time, sag resistance, strength and other important properties of the final product.</li>
<li>It helps to build materials to be applied more easily and perform better.</li>
<li>Also, available with retarded hydration to allow use in ready-to-use building materials.</li>
<li>Culminal™ MHPC 500 PF complies with the SARA 311/312 Hazards, AUSTR (Australia), DSL (Canada), IECSC (China), ENCS (Japan), KECL (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) inventories and 29 CFR 1910.1200 (OSHA HazCom 2012) regulation.</li></ul> Culminal™ MHPC 20000 S by Ashland is a methylcellulose derivative based on nonionic cellulose ether. Acts as a rheology modifier and is suitable for a variety of industrial applications. Used in cementitious adhesives, gypsum plasters and fillers, joint compounds, renders and skim coats, self-levelling underlayments and floor screeds, and many more.<br>
<ul style="padding-left: 40px;"><li>Provides water retention, workability and cohesiveness to mixtures.</li>
<li>Used to control thickening, water demand, open time, sag resistance, strength and other important properties of the final product.</li>
<li>It helps to build materials to be applied more easily and perform better.</li>
<li>Also, available with retarded hydration to allow use in ready-to-use building materials.</li>
<li>Culminal™ MHPC 20000 S complies with the SARA 311/312 Hazards, AUSTR (Australia), DSL (Canada), IECSC (China), ENCS (Japan), KECL (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) inventories and 29 CFR 1910.1200 (OSHA HazCom 2012) regulation.</li></ul> Culminal™ MHPC 100 by Ashland is a methylcellulose derivative based on nonionic cellulose ether. Acts as a rheology modifier and is suitable for a variety of industrial applications. Used in cementitious adhesives, gypsum plasters and fillers, joint compounds, renders and skim coats, self-levelling underlayments and floor screeds, and many more.<br>
<ul style="padding-left: 40px;"><li>Provides water retention, workability and cohesiveness to mixtures.</li>
<li>Used to control thickening, water demand, open time, sag resistance, strength and other important properties of the final product.</li>
<li>It helps to build materials to be applied more easily and perform better.</li>
<li>Also, available with retarded hydration to allow use in ready-to-use building materials.</li>
<li>Culminal™ MHPC 100 complies with the SARA 311/312 Hazards, AUSTR (Australia), DSL (Canada), IECSC (China), ENCS (Japan), KECL (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) inventories and 29 CFR 1910.1200 (OSHA HazCom 2012) regulation.</li></ul> Culminal™ MHPC 20000 P by Ashland is a methylcellulose derivative based on nonionic cellulose ether. Acts as a rheology modifier and is suitable for a variety of industrial applications. Used in cementitious adhesives, gypsum plasters and fillers, joint compounds, renders and skim coats, self-levelling underlayments and floor screeds, and many more.<br>
<ul style="padding-left: 40px;"><li>Provides water retention, workability and cohesiveness to mixtures.</li>
<li>Used to control thickening, water demand, open time, sag resistance, strength and other important properties of the final product.</li>
<li>It helps to build materials to be applied more easily and perform better.</li>
<li>Also, available with retarded hydration to allow use in ready-to-use building materials.</li>
<li>Culminal™ MHPC 20000 P complies with the SARA 311/312 Hazards, AUSTR (Australia), DSL (Canada), IECSC (China), ENCS (Japan), KECL (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) inventories and 29 CFR 1910.1200 (OSHA HazCom 2012) regulation.</li></ul>
Culminal™
Coating ingredients supplied by Ashland
85 Products match your search
Culminal™ MHEC 15000 PFR
by Ashland
Culminal™ FS1550
by Ashland
Culminal™ UP 3010
by Ashland
Culminal™ C8713
by Ashland
- Sustainable option
Culminal™ C4280 M44
by Ashland
- Sustainable option
Culminal™ C8681
by Ashland
- Sustainable option