HARDLEN® BS-40 by Toyobo acts as an adhesion promoter and a compatibilizer. It exhibits low molecular weight, very good compatibility with a wide range of resin systems including acrylics, alkyds, epoxies, urethanes, polyesters and good adhesion on polypropylene, TPO and EPDM. Used to improve adhesion of coatings and inks to olefin-based substrates and also can be used as primer or as coating additive. Complies with TSCA, DSL, ENCS, IECSC, KECL.
Product family:
Chemical family:
Product Type:
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Availability
Product Status:Visible After Login
HARDLEN® BS-40 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Boiling Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Chlorine Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flammable Limits in Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flash Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Resin Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vapor Pressure | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |