EXOdis PC40 by PCC Exol is an anionic polymer dispersing agent. It is available as 40% aqueous solution of sodium salt of polyacrylic acid. It exhibits very good dispersing and stabilizing properties, especially in case of titanium white and mineral fillers. It is safe, non-animal tested and is non-classified according to CLP.
- It is compatible with widely used styrene and acrylic dispersions, as well as homo- & copolymers of vinyl acetate.
- It is also compatible with pigments & rheology modifiers and is highly efficient even in low concentrations.
- It is used as a wetting agent for the production of a broad spectrum of water-based white paints.
- It has a low VOC content which allows to produce paint formulations in compliance with Directive 2004/42/EC.
- EXOdis PC40 is suitable for decorative paints for interior & exterior applications, titanium white concentrates and plaster work.
- The recommended dosage level is 0.2-2%, and for waterborne paints is 0.1-0.6% by weight.
Chemical family:
Product Type:
| CAS Number | Visible After Login |
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| Color | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
For which system
Availability
Product Status:Visible After Login
EXOdis PC40 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Dry Matter Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| pH | 0.0 Visible After Login | Visible After Login | Visible After Login |