Non-thermoplastic PTFE modified micronized plastic. Imparts high abrasion resistance and resistance to metal marking. Scratch resistance will be improved. Imparts good blocking stability. Increased dosage interferes with the coatings gloss. Generally spoils wetting when the product is used in water. Under certain conditions the use of the product in aqueous coating systems is possible. Typical wetting properties of the used binder combined with favorable viscosity can result in good dispersibility of DEUTERON MM 823 even in aqueous systems.
Dosage: The dosage depends mainly on the present system and the required surface. For initial laboratory tests a dosage between 1,0 and 3,0 % is recommended.
Product family:
Chemical family:
Product Type:
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
For which system
Solvent-based Inks|
Coatings|
Powder Coatings|
Inks|
Solvent-based Coatings|
Solvent-Free / High-Solids Coatings
Availability
Product Status:Visible After Login
Deuteron® MM 823 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Density, Bulk | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Oil Absorption Number (OAN) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Particle Size Distribution, D90 | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Particle Size Distribution, Median | 0.0 Visible After Login | Visible After Login | Visible After Login |
| pH | 0.0 Visible After Login | Visible After Login | Visible After Login |