Water in Oil Emulsifiers for Coatings and Inks
46 products found
Dispersogen® FA
by Clariant
Dispersogen® FA by Clariant is a low-VOC, surfactant-based wetting and non-ionic dispersing agent. It acts as emulsifier for W/O & O/W emulsions in paints and coatings. It improves the wetting of pigments & fillers and the compatibility with tinting systems. It is free of alkylphenol ethoxylates and preservatives.
- It is designed for water-based and solvent based pigment preparations and point-of-sales colorants.
- Recommended dosage is 0.2-1% in the paint formulation.
- Dispersogen® FA has a shelf life of 2 years.
- It is registered with REACH, AICS, DSL, ENCS, IECSCS, KECI, NECI, NZIoC, PICCS and TSCA.
- Sustainable option
Chempart SC 100
by Chemical Partners Industry
Chempart SC 100 by Chemical Partners Industry is used as an emulsifying agent for preparation of water-in-oil emulsions. It is a highly effective, stable, colloidal suspension of polysaccharide in water derived from natural, agricultural source.
- It reduces cost keeping the same quality and reduces VOCs.
- It improves yellowing resistance, drying time and mechanical proprieties.
- Chempart SC 100 is used in solvent-based decorative paints, based on long or medium alkyd resins diluted with aliphatic solvents.
- The shelf life is 24 months.
- Sustainable option
Fynol DG 100
by Fine Organics
Fynol DG 100 by Fine Organics is a non-ionic, non-foaming emulsifier. It reduces the cost of solvent-based alkyd coatings while maintaining quality. It is also recommended for water in oil emulsion paints. Fynol DG 100 satisfies the VOC regulation by substituting the amount of solvents by water.
ULTRACID L 90
by Indorama Ventures Public Company
ULTRACID L 90 by Indorama Ventures Public Company is lauryl acid (9 EO) with 13.3 HLB value. It is used as a dispersant, humectant and emulsifier. This grade is efficient surfactant for oil in water and water in oil emulsions. ULTRACID L 90 is designed for use in coatings and paints.
