Polyether Ether Ketones (PEEK) for Coatings and Inks

KetaSpire® KT-880 NT by Syensqo is a high flow, unreinforced polyetheretherketone. It is supplied in a natural colored, pellet form. It is flame resistant and exhibits high thermal resistance. Offers excellent chemical resistance to acids, bases and a broad range of aggressive organic chemicals as well as high heat resistance, fatigue resistance, ductility and good impact resistance. KetaSpire® KT-880 NT applications include powder, water-borne coatings, aerospace, automotive, electrical & electronics and industrial applications.

KetaSpire® KT-880UFP by Syensqo is a high flow, unreinforced polyetheretherketone. It is supplied in a natural-colored, super-fine powder form. It is flame resistant and exhibits high thermal resistance. Offers excellent chemical resistance to acids, bases and a broad range of aggressive organic chemicals as well as high heat & fatigue resistance, ductility and good impact resistance. KetaSpire® KT-880UFP applications include powder & water-borne coatings, aerospace, automotive, electrical & electronics and industrial applications.

KetaSpire® KT-880SFP by Syensqo is an unreinforced, high flow polyetheretherketone. It is supplied in a natural-colored, super-fine powder form. It is flame resistant and exhibits high thermal resistance. Offers excellent chemical resistance to acids, bases and a broad range of aggressive organic chemicals as well as high heat-, impact- & fatigue resistance and ductility. KetaSpire® KT-880SFP applications include powder, water-borne coatings, aerospace, automotive, electrical & electronics and industrial applications.

KetaSpire® KT-820 NT by Syensqo is a low flow grade of unreinforced polyetheretherketone. It is supplied in a natural-colored, pellet form. It is flame resistant and exhibits high thermal resistance. Offers excellent chemical resistance to acids, bases and a broad range of aggressive organic chemicals as well as high heat resistance, fatigue resistance, ductility and good impact resistance. KetaSpire® KT-820 NT applications include powder & water-borne coatings. It is suitable for aerospace, automotive, electrical & electronics and industrial applications.

KetaSpire® KT-820UFP by Syensqo is a low flow grade of unreinforced polyetheretherketone. It is supplied in a natural-colored, super-fine powder form. It is flame resistant and exhibits high thermal resistance. Offers excellent chemical resistance to acids, bases and a broad range of aggressive organic chemicals as well as high heat resistance, fatigue resistance, ductility and good impact resistance. KetaSpire® KT-820UFP applications include powder, water-borne coatings, aerospace, automotive, electrical/ electronics and industrial applications.

VICTREX™ PEEK VICOTE™ 804Blk by Victrex is a black colored polyetheretherketone polymer-based liquid dispersion. Its typical properties are high continuous use temperature of 260°C, excellent wear, abrasion and cut through resistance at these high temperatures, combined with excellent chemical and radiation resistance. VICTREX™ PEEK VICOTE™ 804Blk conforms to FDA regulation 21 CFR 175.300.

VICTREX™ PEEK VICOTE™ 804 by Victrex is polyetheretherketone polymer-based liquid dispersion. Its typical properties include high continuous use temperature of 260°C, excellent wear, abrasion and cut through resistance at these high temperatures combined with very good chemical and excellent radiation resistance. It gives more control over electrical dissipation to prevent build-up of an electrical charge. It is used when thinner coatings are required, where difficult geometries must be coated, and in instances where enhanced properties such as release are critical to performance. VICTREX™ PEEK VICOTE™ 804 complies with the compositional requirements of regulation 21 CFR 175.300 for resinous and polymeric coatings of the Food and Drug Administration (FDA).

VICTREX™ PEEK VICOTE™ 809 by Victrex is semi-crystalline, linear polyetheretherketone polymer-based off-white liquid dispersion. It gives more control over electrical dissipation to prevent build-up of an electrical charge. It has been specifically formulated to provide a resilient coating with varying levels of lubricant to give high wear and abrasion resistance combined with very good release properties. VICTREX™ PEEK VICOTE™ 809 complies with FDA regulation 21 CFR 175.300.

VICTREX™ PEEK VICOTE™ F816Blk by Victrex is an aromatic, linear polyetheretherketone polymer-based black colored liquid dispersion. It It prevents flash rusting and has low level of extractables. It is specifically formulated to provide a resilient coating with high wear and abrasion resistance combined with excellent release properties on ferrous substrates such as carbon and cast steels. These properties are retained at high temperatures where other release coatings would potentially fail. VICTREX™ PEEK VICOTE™ F816Blk complies with FDA regulation 21 CFR 175.300.

VICTREX™ PEEK VICOTE™ 703 by Victrex is polyetheretherketone polymer-based powder. It can be used electrostatically and in formulation of liquid dispersions. It is a linear, aromatic, semi-crystalline thermoplastic in nature and exhibits flow above the melt temperature. It is available in average particle size of 23 micron. When processed using the correct guidelines, the coatings will exhibit the excellent properties like excellent wear, abrasion and cut through resistance at high temperatures (260°C). It offers hydrolysis resistance, strength, durability, excellent chemical and radiation resistance. VICTREX™ PEEK VICOTE™ 703 is inherently flame retardant and has low level of extractables. It complies with the compositional requirements of regulation 21 CFR 175.300 for resinous and polymeric coatings of the Food and Drug Administration (FDA).