Cellulosic Resins for Coatings and Inks

Tylose® H 15000 YP2 distributed by DKSH is a hydroxyethyl cellulose. highly etherified, with high biostability and retarded swelling time. It provides effects like thickening, pseudoplastic properties, water retention, protective colloid effects, film forming and a high level of salt tolerance.

• It offers high gloss, high pigment compatibility, high water retention, and high thickening effect.
• It exhibits moderate wet scrub resistance, anti-spattering, and pseudoplasticity.
• Tylose® H 15000 YP2 is used for paints and coatings applications like interior paints, exterior paints, silicon resin paints, tinters, silicate paints, glazes, gloss effect top coats.
• It is available in Denmark, Sweden, Finland, Norway and Iceland.

Tylose® H 100000 YP2 distributed by DKSH is hydroxyethyl cellulose. It is used in interior and exterior paints. It provides thickening effect, pseudoplastic properties, moderate water retention, protective colloid effects, film forming and a high level of salt tolerance.

• Tylose® H 100000 YP2 exhibits high gloss, high pigment compatibility and high wet scrub resistance.
• It is available in Denmark, Sweden, Finland, Norway and Iceland.

Aqualon™ EC-N10 distributed by DKSH is a cellulose ether made by the reaction of ethyl chloride with alkali cellulose. It is a pigment dispersant and thixotrope for solvent-borne inks. It is soluble in a wide range of solvents, and flexible over a wide range of temperatures. It shows resistance to alkalies, both dilute and concentrated, and to salt solutions.

• It is compatible with an unusually wide range of resins and plasticizers, including oils and waxes.
• It provides excellent electrical properties combined with good thermal stability, outstanding flexibility and toughness.
• It possesses high dielectric constant and scuff resistance.
• It offers viscosity control and is suitable for magnetic inks.
• The low density of ethylcellulose makes it possible to get greater coverage and greater volume per unit weight than with other cellulose derivatives.
• Aqualon™ EC-N10 is used in lacquers & coatings and is available only in Indonesia.

Aqualon™ EC (N7) by Ashland is a pH insensitive, non-ionic ethyl ether of cellulose. It is soluble in a wide range of polar organic solvents while remaining insoluble in water.

• Forms flexible films over a broad temperature range. enhancing coating performance.
• Ideal for use in tablet binding, modified release formulations, film former and film coating.

Aqualon™ EC N-300 by Ashland is a non-ionic ph-insensitive ethyl ether of cellulose. It is suitable for producing flexible films across a broad temperature range.

• Aqualon™ EC N-300 is recommended for film coating applications.
• It is certified Halal and Kosher and meets all REACH and RoHS compliance requirements.

Aqualon™ EC N-22 by Ashland is a pH insensitive non-ionic ethyl ether of cellulose. It is used in flexible films over a wide range of temperatures.

• Aqualon™ EC N-22 is suitable for film coating applications.
• It is Halal and Kosher certified as well as REACH and RoHS compliant.

Klucel™ L ind by Ashland is a non-ionic hydroxypropyl cellulose ether. It is non-microplastic that provides excellent thermoplastic, film-forming, and mechanical performance, producing flexible, plasticizer-free films that remain non-tacky even under high-humidity conditions.

• It is available in a broad range of molecular weights and particle sizes.
• Klucel™ L ind is recommended for seed coatings.
• It is Reach compliant.

Klucel™ G ind by Ashland is a non-ionic hydroxypropyl cellulose ether. It produces flexible, plasticizer-free films that remain non-tacky even under high-humidity conditions.

• It is non-microplastic that provides excellent film-forming, thermoplastic and mechanical performance.
• It is available in a broad range of molecular weights and particle sizes.
• Klucel™ G ind is suitable for seed coatings.
• It is Reach compliant.

Klucel™ E ind by Ashland is a non-ionic hydroxypropyl cellulose ether. It exhibits strong thermoplastic behavior and reliable film-forming performance, even under high-humidity conditions.

• It produces flexible, plasticizer-free films that remain non-tacky at high humidity and delivers excellent mechanical strength.
• It is non-microplastic and available in a wide range of molecular weights and particle sizes.
• Klucel™ E ind is recommended for seed coatings.
• It is Reach compliant.

AQUALON™ EC-T 100 by Ashland is a non-ionic ethyl ether of cellulose. It is pH insensitive used in flexible films over a wide range of temperatures.

• AQUALON™ EC-T 100 is recommended for film coating applications.
• It is Halal and Kosher certified as well as REACH and RoHS compliant.