Cationic Monomers for Coatings and Inks

Aron Oxetane OXT-221 distributed by DKSH is four-membered cyclic ether compound used as cationic monomer for UV curing systems. It is similar to epoxy compounds with a higher & rapid polymerization rate. It offers superior physical properties, including hardness, flexibility and low shrinkage rates.

• It has high reactive diluency with low initiator concentration and no oxygen inhibition.
• It shows high degree of crosslinking and maintains high elasticity, even at temperatures above the Tg.
It provides high gloss, low skin irritation, and excellent adhesion to substrates.
• It exhibits excellent heat resistance, resilience and durable film properties and is used in chemical-resistance coatings.
• Aron Oxetane OXT-221 is available in Switzerland, Austria, Czech Republic, Slovakia, Hungary, Romania, Bulgaria, Greece, Slovenia, Croatia, Serbia/Monteneg, Israel, Germany, United Kingdom, France, Denmark, Sweden, Norway, Finland, Iceland, Estonia, Latvia and Lithuania.

Aron Oxetane OXT-212 distributed by DKSH is four-membered cyclic ether compound used as cationic monomer for UV curing systems. It is similar to epoxy compounds with a higher & rapid polymerization rate. It has the lowest surface tension of the oxetane compounds. It offers superior physical properties, including hardness, flexibility and low shrinkage.

• It has high reactive diluency with low initiator concentration and no oxygen inhibition.
• It provides high gloss, excellent heat resistance, resilience, durable film properties, low skin irritation and excellent adhesion to substrates.
• It is used in paints, inks, and coatings.
• Aron Oxetane OXT-212 is available in Switzerland, Austria, Czech Republic, Slovakia, Hungary, Romania, Bulgaria, Greece, Slovenia, Croatia, Serbia/Monteneg, Israel, Germany, United Kingdom, France, Denmark, Sweden, Norway, Finland, Iceland, Estonia, Latvia and Lithuania.

DIALLYLAMINE HTC-2 by Zhejiang Xinhaitian Bio-Technology is an intermediate. It is used in the production of formaldehyde-free fixing agents for dyeing auxiliaries, Diallyldimethylammonium chloride copolymers, crosslinking agents, dyes, coatings, and resin modifiers.

Sodium carboxymethyl celluloseaverage Mw ~90000 by Alfa Chemistry is a water dispersible sodium salt of carboxy-methyl ether of cellulose that forms a clear colloidal solution. Used in surface coatings. It is a hygroscopic material that has the ability to absorb more than 50% of water at high humidity.

Oxetane Biphenyl by BCH is a difunctional oxetane monomer. It exhibits high rigidity, flexibility and good chemical resistance. Oxetane Biphenyl is suitable for coatings and UV/LED curing in cationic formulations.

3-Ethyl-3-(acryloyloxymethyl)oxetane by BCH is an oxetane monomer. It is recommended for coatings and UV/LED curing in free-radical/cationic hybrid systems.

3-Ethyl-3-(hydroxymethyl)oxetane by BCH is an oxetane monomer. It is suitable for coating and UV/LED curing especially within cationic formulations. 3-Ethyl-3-(hydroxymethyl)oxetane offers low viscosity and high cohesive force.

3,3'-[Oxybis(methylene)]bis[3-ethyloxetane] by BCH is a difunctional oxetane monomer. It is recommended for UV/LED curing in cationic formulations and coating applications. 3,3'-[Oxybis(methylene)]bis[3-ethyloxetane] exhibits low viscosity, high curing speed and rigidity.

3-Ethyl-3-(chloromethyl)oxetane by BCH is an oxetane monomer. It is used for coating and UV/LED curing in cationic systems.

3-Ethyl-3[(2-ethylhexyloxy)methyl]oxetane by BCH is an oxetane monomer. It is designed for UV/LED curing in cationic systems and coating applications. 3-Ethyl-3[(2-ethylhexyloxy)methyl]oxetane shows low viscosity and good tenacity.