Coating ingredients for Paper & Board Coatings
2878 products found
Dispelair® CF 246
by DKSH
Dispelair® CF 246 distributed by DKSH is a foam control agent and excellent defoamer for water-based coatings. It is effective over a wide range of pH values and temperatures, works efficiently at low concentrations, and helps improve process productivity.
- It is used in low gloss paints and paper coatings.
- A typical addition level is 0.1-0.5% in total depending on the severity of the foam problem.
- Dispelair® CF 246 has a shelf life of 1 year.
- It is available in Canada.
- Sustainable option
- Support available
- Original documents
EBECRYL® 436
by allnex
EBECRYL® 436 by allnex is a reactive chlorinated polyester resin diluted 40% with the reactive diluent trimethylolpropane triacrylate (TMPTA). It exhibits good lithographic behavior, pigment wetting properties and fast cure response in ultraviolet light (UV) curable coatings and inks. Cured films of EBECRYL® 436 display good adhesion to metals, plastics and paper. It is recommended for wet lithographic inks for paper, plastics and metals, overprint varnishes and post-formable inks.
- Support available
- Original documents
EBECRYL® 600/30DP
by allnex
EBECRYL® 600/30DP by allnex is a di-functional epoxy acrylate diluted with 30% of dipropyleneglycol diacrylate (DPGDA).This resin is characterized by its light color, low irritancy and fast cure response.
- EBECRYL® 600/30DP is recommended for screen inks, lithographic, gravure, direct or reverse roll, overprint varnishes, curtain coating, paper upgrading and coatings for wood, cardboard, chipboard and rigid plastics.
- UV/EB cured films exhibit high surface hardness and gloss, low residual odor and excellent solvent resistance.
- The shelf life of this grade is 2 years.
- Support available
- Original documents
EBECRYL® 3701
by allnex
EBECRYL® 3701 by allnex is a VOC-, solvent- and tin-free, modified bisphenol A epoxy diacrylate. It imparts flexibility and toughness to ultraviolet light (UV) or electron beam (EB) cured coatings and inks, while maintaining fast cure response and superior chemical resistance that are typical of standard epoxy acrylates.
- It provides high gloss, and good abrasion and impact resistance.
- Formulated UV/EB curable products containing EBECRYL® 3701 may be applied via direct or reverse roll, offset gravure, metering rod, slot die, knife-over-roll, air knife, curtain, immersion and spin coating methods.
- It is recommended for clear coatings for paper, wood and rigid plastic, as well as lithographic, screen and flexographic ink vehicles.
- Sustainable option
- Support available
- Original documents
EBECRYL® 3703
by allnex
EBECRYL® 3703 by allnex is an amine-modified bisphenol A epoxy acrylate. Suitable for clear coatings for paper & plastics, topcoats for wood, and lithographic- & screen ink vehicles.
- It shows an exceptionally fast cure via exposure to ultraviolet light.
- UV/EB cured products based on EBECRYL® 3703 exhibit good flexibility, high gloss, good abrasion- & chemical resistance, and enhanced adhesion to plastics.
- It may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods.
- It has a shelf life of 2 years.
- Support available
- Original documents
EBECRYL® 600
by allnex
EBECRYL® 600 by allnex is a low VOC diacrylate ester of bisphenol A epoxy resin. It provides light color and fast cure response.
- Films cured via exposure to ultraviolet light (UV) or electron beam (EB) possesses high surface hardness and gloss and excellent chemical resistance.
- It reduces energy consumption and exhibits low carbon foot print, good compatibility, low flammability and long potlife.
- It is a radiation curable, solvent- and tin free grade.
- EBECRYL® 600 is recommended for lithographic and screen inks, overprint varnishes and fast cure coatings.
- It is also used in coatings for paper, paperboard, wood, chipboard and rigid plastics.
- Support available
- Original documents
EBECRYL® 4220
by allnex
EBECRYL® 4220 by allnex is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA). It produces tough coatings that resist yellowing. EBECRYL® 4220 is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film.
- Support available
- Original documents
EBECRYL® 860
by allnex
EBECRYL® 860 by allnex is an epoxidized soya oil acrylate. Exhibits good hydrophilic-lipophilic balance for lithography and good surface appearance. It improves the flow and leveling of UV or electron beam (EB) curable inks and coatings. It enhances pigment & substrate wetting and adhesion when used as a modifier. Recommended for overprint varnishes for paper, lithographic ink vehicles, metal decorating and protective coatings, screen ink vehicles and pigmented wood coatings. Formulated products containing EBECRYL® 860 may be applied via direct or reverse roll, offset gravure, metering rod, slot die, knife over roll, air knife, curtain, immersion and spin coating methods, as well as flexographic, lithographic and screen printing.
- Support available
- Original documents
EBECRYL® 11
by allnex
EBECRYL® 11 by allnex is a polyethylene glycol diacrylate derivative. It is 100% water soluble characterized by low viscosity and low color. It offers good flexibility and low water resistance. It is recommended for use in screen inks, wood applications and paper coatings. Formulated UV/EB curable products containing EBECRYL® 11 may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods. The shelf life of the grade is 2 years.
- Support available
- Original documents
BLACK PEARLS® 120
by DKSH
BLACK PEARLS® 120 distributed by DKSH is a cost-effective, general purpose low color black pigment. It is used as a tinting black in plastics or coatings applications. This economical pigment black can allow higher loadings in most systems and offers very blue undertones. It is also available in an easier to disperse powdered form.
- It offers excellent rub resistance, good viscosity, and flow properties.
- It is recommended for underbody/underhood automotive, general industrial, or architectural trade sales applications where high jetness is not required.
- It can be easily dispersed using a high speed disperser or sandmill for liquid coatings or a single screw extruder for powder coatings.
- It is also used in general dispersions, paper applications, printing inks, concrete, and cement applications.
- BLACK PEARLS® 120 is available in Netherlands, Belgium, Luxembourg, and Myanmar.
- Support available
- Original documents
