Coating ingredients for Coil Coatings

HALOX® 680 by ICL is a VOC-free, non-flammable, smart release anticorrosive pigment which releases a heterocyclic organic corrosion inhibitor from an organic matrix that adsorbs on the metal surface and forms a protective film. It offers decreased cathodic delamination (undercutting) and improves cut edge protection.

• It is jet milled grade that provides increased intercoat coating adhesion and prevents osmotic blistering. It reduces cost by lowering zinc phosphate loading.
• It acts synergistically with other corrosion inhibitors such as zinc phosphate, Z-PLEX 111, SZP-391, HALOX® 430 and Zn-free phosphates.
• It can be formulated into solvent-based, high solid-, and powder coatings.
• It is suitable for solvent-based primers & DTM alkyds, acrylics, water-based epoxies and urethanes, high solids and 100% solids, semi-gloss paints and coil coatings.
• The dosage level of HALOX® 680 as a stand-alone corrosion inhibitor or as an adhesion promoter is 1-2% based on total formula weight (TFW).
• When used in synergy with standard zinc phosphate the loading level of the product is typically 0.5-4% on total formula weight (TFW).

MARNEX™ AH651 by Macroocean is a high molecular weight, saturated linear polyester resin. It shows excellent adhesive strength to steel and PET or PVC films. It offers heat seal properties, excellent pigment wetting and heat resistance. Also, offers better flexibility and adhesion is available while using with low Tg types of resin, such as MARNEX™ AL171 and MARNEX™ AL072. It can be dissolved in ketone, ether or esters type of solvents, such as isophorone, acetone, MEK, CYC, DBE & EA. And it is usually dissolved with aromatic solvents, such as 100# & 150#. MARNEX™ AH651 is used in coil coatings and gravure & screen printing inks. It complies with FDA 175.300 (only for non-alcoholic goods) and 175.105. The shelf life of this product is 24 months.

Bentone® 38 by Elementis is a highly efficient rheological modifier designed for use in low to intermediate polarity organic systems. It is an organic derivative of a hectorite clay.

• It increases viscosity, controls sagging on vertical surfaces, and penetration on porous substrates.
• It improves flow and leveling, prevents pigment settling during storage and syneresis in thixotropic systems.
• It is suitable for aerosol paints, anti-corrosive paints, automotive finishes and primers, coil coating systems, industrial paints, trichloroethylene dip coatings, and wood stains.
• It is used in interior and exterior house paints.
• Recommended dosage level is 0.2-0.5% for house and industrial paints.
• Bentone® 38 has a shelf life of 4 years.

Bentone® 34 by Elementis acts as a rheological additive designed for low to intermediate polarity organic systems. It is an organic derivative of a bentonite clay. It prevents pigment settling during storage and syneresis in thixotropic systems.

• It improves flow and leveling and controls sagging on vertical surfaces and penetration on porous substrates.
• It increases viscosity and provides thixotropy.
• It is used for anti-corrosive paints, automotive finishes, coil coating systems, dip coatings and industrial finishes.
• Also used in interior and exterior house paints including do-it-yourself paints, paint stripper pastes, printing inks, refinishes for household appliances and road marking paints.
• Recommended dosage level is 0.2-0.5% for house and industrial paints, 0.5-1% for primer and 0.2-0.3 for aqueous systems.
• Bentone® 34 has a shelf life of 4 years.

EBECRYL® 170 by allnex is acidic acrylate-based adhesion promoter. It is designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. EBECRYL® 170 is characterized by low viscosity, acid functionality, good adhesion to metal substrates and improved reactivity. It is applied by direct or reverse roll, offset gravure, metering rod, slot die, knife over roll, air knife, curtain and immersion coating methods. The typical usage level is between 1 and 5% by weight of the total formulation. Recommended for use in general metal coatings & primers, coatings for galvanized pipes & tubes. Also used in coil coatings.The shelf life of the grade is 2 years.

EBECRYL® 168 by allnex is acidic methacrylate-based adhesion promoter. EBECRYL® 168 is characterized by improved compatibility, light color, low viscosity and acid functionality. It may be applied via direct or reverse roll, offset gravure, metering rod, slot die, knife over roll, air knife, curtain and immersion coating methods. It is designed for ultraviolet and electron beam curable coatings on metal. The typical usage level is between 1-5% by weight of the total formulation. Recommended for use in general metal coatings & primers, coatings for galvanized pipes & tubes. Also used in coil coatings. The shelf life of the grade is 2 years.

FERROXIDE® 206M distributed by DKSH is a micronized precipitated red iron oxide-based inorganic pigment. It has high chroma so that it can replace a portion of organic, chromate and titanate pigments in selected applications.

• It is reliable, have consistent quality and are stable under exposure to sunlight/UV radiation.
• It offers alkali-, chemical- and weather resistance.
• It provides tint strength, color purity, light fastness and long-lasting performance.
• FERROXIDE® 206M is used in coil, concrete and powder coatings as well as in inks.

FERROXIDE® 208M distributed by DKSH is a micronized precipitated red iron oxide-based inorganic pigment. It shows high chroma so that it can replace a portion of organic, chromate and titanate pigments in selected applications.

• It is reliable, has consistent quality and stable under exposure to sunlight/UV radiation.
• It offers alkali-, chemical- and weather resistance.
It provides tint strength, color purity, light fastness and long-lasting performance.
• FERROXIDE® 208M is used in coil-, concrete- and powder coatings as well as in inks.

FERROXIDE® 214M distributed by DKSH is a micronized red iron oxide based inorganic pigment. It is reliable with consistent quality and stable under exposure to sunlight/UV radiation. It offers alkali, chemical and weather resistance. FERROXIDE® 214M is used in coil, concrete and powder coatings as well as in inks. It is available in Europe.

FERROXIDE® 204M distributed by DKSH is a micronized precipitated orange iron oxide-based inorganic pigment. It has high chroma so that it can replace a portion of organic, chromate and titanate pigments in selected applications.

• It has consistent quality and are stable under exposure to sunlight/UV radiation.
• It offers alkali, chemical and weather resistance.
• It provides tint strength, color purity, light fastness and long-lasting performance.
• FERROXIDE® 204M is used in coil- and powder coatings as well as in inks.