Coating ingredients for Can Coatings
2085 products found
MARNEX™ AH448
by Macroocean
MARNEX™ AH448 by Macroocean is a high molecular weight, saturated linear polyester resin. It shows excellent adhesive strength to steel, aluminum foil, PET or PVC films. Also, better adhesion and film strength can be achieved while cross-linked with melamine or blocked isocyanate curing agents. This grade offers heat seal properties, flexibility, good processibility and no sticky problem during transportation. It can be dissolved in ketone, ether or esters type of solvents, such as isophorone, acetone, MEK, CYC, DBE & EA. And it is usually dissolved with aromatic solvents, such as 100# & 150#. MARNEX™ AH448 is recommended for interior can coating and screen printing & gravure inks. It complies with FDA 175.300 (only for non-alcoholic goods) and 175.105. The shelf life of this product is 24 months.
- Support available
- Original documents
ETERKYD 4901-B-72
by DKSH
ETERKYD 4901-B-72 distributed by DKSH is an adhesion promoter for industrial coatings. It is used mainly in baking paints and primers.
- It is formulated to meet air pollution regulations.
- It imparts excellent balance of hardness and flexibility.
- It produces high-gloss films with excellent color and color retention.
- ETERKYD 4901-B-72 is recommended for coil coatings, general industrial gloss bake enamels for spray, dip, or flow.
- It is suitable for high-solids, solvent-thinned coil coatings, can coatings and waterborne one-coat systems.
- This product is available in Canada and USA.
- Sustainable option
- Support available
- Original documents
MULTIMOD™ APT-W1
by Macroocean
MULTIMOD™ APT-W1 by Macroocean is a linear polyester based, adhesion promoter. It can improve the adhesion to substrates or coatings of different paint & ink systems. This grade can be dissolved in ketone, ether or esters type of solvents, which is usually dissolved with aromatic solvents, such as 100# & 150#, etc. And it can be dissolved in UV monomers, such as HDDA and TPGDA. It can be used in solvent-based, solvent-free and UV curing systems. MULTIMOD™ APT-W1 shows excellent adhesion improvement on steel, aluminum and plastics. It improves the intercoat adhesion, corrosion protection and flexibility. It is used in industrial-, coil-, can- & architectural coating and screen printing ink. Recommended addition for above applications: solid calculated on binder solid: 3-15%. It is in full compliance with FDA 175.300, also for alcoholic contents. The shelf life of this product is 24 months.
- Support available
- Original documents
CYCAT® 4040 catalyst
by allnex
CYCAT® 4040 catalyst by allnex is a fast cure para-toluene sulfonic acid-based catalyst. It is designed to initiate and accelerate the reaction of amino crosslinking agents, such as those based on melamine and urea formaldehyde. CYCAT® 4040 catalyst is used in printing inks, solvent- & water-borne conversion varnishes for wood, general industrial, paper and exterior can coatings. It is suitable for 2K ambient cure or low bake systems. It offers excellent formulated package stability and reduces energy requirements. Recommended dosage level is 0.5 % catalyst solution. The shelf life of the grade is 720 days.
- Support available
- Original documents
WANNATE® ITBL-460S
by Wanhua Chemical
WANNATE® ITBL-460S by Wanhua Chemical is a caprolactam-blocked aliphatic polyisocyanate derived from isophorone diisocyanate (IPDI), formulated in solvent naphtha with a solids content of 60%. It is designed as a high-performance curing agent for one-component (1K) polyurethane baking coatings, including coil and industrial coatings.
- It delivers outstanding chemical resistance, durability, superior mechanical properties and good adhesion.
- It is primarily used in food-contact packaging coatings, particularly for interior can coatings, where regulatory compliance and high performance are essential.
- WANNATE® ITBL-460S complies with key global food safety regulations, including approvals from the FDA and EFSA.
- Sustainable option
- Support available
- Original documents
WANNATE® HTBL-175S
by Wanhua Chemical
WANNATE® HTBL-175S by Wanhua Chemical is a MEKO blocked aliphatic polyisocyanate based on 75% hexamethylene diisocyanate (HDI) and dissolved in 25% Solvent naphtha 100. It can be used as a hardener in colorfast, weather-stable, one-component polyurethane coatings. It improves flexibility and adhesion in conventional stoving systems.
- It is compatible with various plasticizers such as phosphoric-, sulphonic-, adipic acid and phthalic acid esters.
- It is suitable for high-grade industrial finishes such as electrical appliances, small components, can- and coil coatings.
- WANNATE® HTBL-175S is also used in primer surfaces and topcoats for automotive finishes.
- Support available
- Original documents
Luna-nol C-12
by DKSH
Luna-nol C-12 distributed by DKSH is a water-based coalescent and retarder solvent. It can enhance the performance properties of the paint and shows good film forming properties.
- It is designed for use in coatings such as architectural, automotive OEM (electrodeposition primers) and can and floor polishes.
- It is suitable for general industrial-, industrial maintenance-, marine- and industrial wood- & transportation coating applications.
- It is recommended for emulsion polymer systems like latex paints, coil coatings and baking enamels.
- It can be used in graphic arts & printing inks (lithographic and letterpress oil-based inks).
- It is available in USA, Europe and Asia/Pacific regions.
- Support available
- Original documents
CYCAT® 4045
by allnex
CYCAT® 4045 by allnex is amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino cross-linking resins while providing improved formulation package stability. It is suggested for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH. It minimizes film wrinkling. It is designed for general industrial finishes, automotive basecoats, coil- and exterior can coatings. The shelf life of CYCAT® 4045 is 720 days at 32°C.
- Support available
- Original documents
CYMEL® 303 LF
by allnex
CYMEL® 303 LF by allnex is a highly methylated, monomeric melamine crosslinker supplied in liquid form. Its high extent of alkylation and low tendency to self-condense makes this product a highly effective crosslinking agent for a broad range of applications such as can, container, automotive and general industrial coatings. While CYMEL® 303 LF is insoluble in water, it shows excellent compatibility with water-soluble backbone polymers and provides very good stability in amine-stabilized waterborne formulations. It shows excellent compatibility with water-soluble backbone polymers and provides very good stability in amine-stabilized water-borne formulations. Recommended for high solids & water-borne-coatings and inks. The shelf life of this resin is 1800 days.
- Support available
- Original documents
MARCOA™ CH488
by Macroocean
MARCOA™ CH488 by Macroocean is a high molecular weight, saturated linear polyester resin. It is suitable to replace BPA based epoxy resins for BADGE-free formulations. It shows excellent adhesive strength to steel and aluminum. A mixed crosslinking agent with melamine, phenolic and block NCO is recommended. MARCOA™ CH488 offers high sterilization resistance and good flexibility. It can be dissolved in ketone, ether or esters type of solvents, such as isophorone, acetone, MEK, CYC, DBE and EA. And, it is usually dissolved with aromatic solvents, such as 100# & 150#. Recommended for interior can coating, three-piece cans, pilfer proof caps and drawn & irregular cans. It complies with FDA 175.300, also for alcoholic contents. The shelf life of this product is 24 months.
- Support available
- Original documents
