Return to supplier page
Polyol Y–1900 by SKC is polyester polyol. Used in the manufacture of low-elastic polyurethane foam. Triol. Offers high resilience and high elongation. Its physical properties can be adjusted in combination with the DF series of products. Used in the manufacture of prepolymer and one shot products in the whole area of urethane. Aromatic amine based polyol. It has low molecular weight and good reactivity. Suitable for spray foaming. Polyol contaning one -OH group. It reacts with isocyanate. Offers flame retardancy, low VOC, excellent anti-fogging and anti-scorch performance. It has excellent adhesion in clothing, even if only a small amount is used. It is well mixed with polyester polyol. Used in the production of flame adhesion slab foam. Triol. Offers high resilience and high elongation. Its physical properties can be adjusted in combination with the DF series of products. Used in the manufacture of prepolymer and one shot products in the whole area of urethane. Polymeric polyol. It improves the hardness of foam independently or in combination with base polyol. Since it maintains a low viscosity, it has a good flow in manufacturing foam and minimizes pin holes while yielding a relatively high hardness. Used in the manufacture of highly elastic slab foams. Diol. It contains the most general polyol. It is very reactive. Offers high resilience and high elongation. Used in the manufacture of moisture-curing type 1 liquid prepolymers. Sorbitol based polyol. Offers excellent mechanical properties and thermal insulation. Used in the production of hard foam. Polymeric polyol. It improves the hardness of foam independently or in combination with base polyol. It has higher viscosity than Y-7930. Its hardness and physical properties are better than Y-7930 to a certain degree. Used in the production of soft slab and soft mold foams. Triol. Offers high resilience and high elongation. Its physical properties can be adjusted in combination with the DF series of products. Used in the manufacture of prepolymer and one shot products in the whole area of urethane.
Polyol
Adhesive ingredients supplied by SKC