Return to supplier page
SR 313A by Sartomer (Arkema Group) is lauryl methacrylate. It is a low volatility mono-functional monomer with a long chain aliphatic hydrophobic backbone. It offers water resistance, weatherability, impact strength, flexibility, low shrinkage and adhesion. It possess compatibility with acrylics. SR 313A complies with Australia (AICS), Canada (DSL), China (IECSC), Europe EINECS), Japan (ENCS), Korea (ECL), New Zealand (NZIoC), Philippines (PICCS) and Switzerland inventory. SR 368 NS by Sartomer (Arkema Group) is a tris (2-hydroxy ethyl) isocyanurate triacrylate. It is trifunctional. It is a white, crystalline, solid triazin compound with a melt point of 52-54°C which is used in free radical polymerization. Exhibits weatherability, hardness, scratch resistance, and many other high performance characteristics. SR 368 NS is suitable for use in rapid cure technologies like UV/EB curing. SR 339 NS by Sartomer (Arkema Group) is a 2-phenoxyethyl acrylate. It is a low volatility monofunctional, aromatic monomer. Exhibits weatherability, hardness, scratch resistance, and many other high performance characteristics. SR 339 NS is suitable for use in rapid cure technologies like UV/EB curing. SR 395 NS by Sartomer (Arkema Group) is an isodecyl acrylate. It is monofunctional. It is a monofunctional, hydrophobic monomer. Exhibits weatherability, hardness, scratch resistance, and many other high performance characteristics. SR 395 NS is suitable for use in rapid cure technologies like UV/EB curing. SR 423 NS by Sartomer (Arkema Group) is an isobornyl methacrylate. It is monofunctional. It is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing that have a high glass transition temperature. SR 423 NS may enhance the performance of advanced materials by reducing VOCs, replacing styrene, increasing gel times, and improving surface hardness and impact resistance. SR 238 NS by Sartomer (Arkema Group) is a 1,6 hexanediol diacrylate. It is difunctional. It has low viscosity. It is a fast-curing monomer with low volatility. Offers hydrophobic backbone and good solvency for use in free radical polymerization. Exhibits weatherability, hardness, scratch resistance, and many other high-performance characteristics. SR 238 NS is suitable for use in rapid cure technologies like UV/EB curing. Tetrahydrofurfuryl methacrylate. It is monofunctional and of low viscosity. It promotes adhesion to numerous substrates. Offers weatherability, chemical resistance, low shrinkage, hardness, impact strength, heat-, water- and abrasion resistance. Recommended for anaerobic adhesives. Trifunctional methacrylate ester. It offers an excellent adhesion and fast cure response. The adhesion promoter is at 5-10%. It exhibits good chemical resistance, good hardness, good heat resistance and high abrasion resistance. SR9009 does not support high temperatures, localized heat sources (drum or band heaters), oxidizing conditions, freezing conditions, direct sunlight, ultraviolet radiation, and inert gas blanketing. It should not be used with strong oxidizers, strong reducers, free radical initiators, inert gases, oxygen scavengers, other sources of ignition, alkali metal ions, heavy metal compounds and amines. SR -399 by Sartomer (Arkema Group) is dipentaerythritol pentaacrylate. It is a low skin irritation monomer. It offers water, chemical, heat and abrasion resistance. It provides good adhesion, weatherability, flexibility, fast cure response for ultraviolet and electron beam curing. It is used in binder and structural adhesives. SR -399 complies with AICS, DSL, CECS, EINECS, ENCS, ECL and PICCS. Trifunctional methacrylate ester. It provides an exceptional adhesion to metal substrates. It exhibits good chemical resistance, good hardness, good heat resistance, high abrasion resistance and fast cure response. SR9011 does not support high temperatures, localized heat sources (drum or band heaters), oxidizing conditions, freezing conditions, direct sunlight, ultraviolet radiation, and inert gas blanketing. It should not be used with strong oxidizers, strong reducers, free radical initiators, inert gases, oxygen scavengers, other sources of ignition, alkali metal ions, heavy metal compounds and amines. Recommended to be used at usage level of 5-10%.
SR
Adhesive ingredients supplied by Sartomer (Arkema Group)