Return to supplier page
D.E.H.™ 52 by Olin is an amine adduct curing agent, DETA modified with liquid epoxy. Reacts with liquid epoxy resins at room temperature. Used in two-pack adhesives. D.E.H.™ 52 is hygroscopic and may pick up moisture and carbon dioxide from the atmosphere. It has shelf life of 24 months. D.E.H.™ 140 by Olin is a standard polyamide resin. Exhibits low viscosity and high chemical resistance. Provides excellent adhesion to various substrates and good balance in performances. D.E.H.™ 140 is recommended for use in adhesives. D.E.H.™ 125 by Olin is a standard polyamide resin. Provides excellent adhesion to various substrates. D.E.H.™ 125 is recommended for use in adhesives. Liquid aliphatic polyamine. Used in adhesives. Acts as an epoxy curing agent. Offers a short pot-life and cures in minutes with standard unmodified liquid epoxy resins. Amine blend curing agent, DETA modified with bisphenol A. Reacts with liquid epoxy resins at room temperature. Used in 2-pack
adhesives. Is hygroscopic and may pick up moisture and carbon dioxide from the atmosphere. Lows cost aliphatic polyamine curing agent. Similar in characteristics
to DETA and TETA. Offers good flexibility. Used in two-pack
adhesives. Yields much higher peel strength than DETA or TETA at comparable geltimes and lower cost. Lows cost tetraethylenepentamine curing agent. Provides short pot life and cures in minutes with liquid epoxy resins. Used in adhesives. Lows cost aminoethylpiperazine curing agent. Provides short pot life and cures in minutes with liquid epoxy resins. Used in adhesives. Lows cost diethylenetriamine curing agent. Provides a short pot life and cures in minutes with liquid epoxy resins. Used in adhesives. D.E.H.™ 860 by Olin is an aqueous polyamide solution. Acts as a curing agent. It has emulsification capability. D.E.H.™ 860 is suitable for impregnation and sealing of concrete substrates.
D.E.H.™
Adhesive ingredients supplied by Olin