Return to supplier page
CUMAR® P-10 by Neville Chemical is liquid hydrocarbon tackifying resin produced by catalytic polymerization of predominantly indene and other aromatic monomers. This low molecular weight additive acts as an acrylic tackifier and rheology modifier. It offers improved moisture resistance and resistance to acids and alkalis. CUMAR® P-10 is used in sprayable adhesives and sealants. It complies with FDA 175.105 and TSCA regulations. CUMAR® P-25 by Neville Chemical is a low molecular weight, liquid hydrocarbon tackifying resin produced by catalytic polymerization of predominantly indene and other aromatic monomers. This additive acts as an acrylic tackifier and rheology modifier. It offers improved moisture resistance and resistance to acids and alkalis. CUMAR® P-25 is used in adhesives and sealants. It complies with FDA 175.105 and TSCA regulations. CUMAR® 130 by Neville Chemical is a low molecular weight, light colored, hydrocarbon resin-based tackifier. It is produced by catalytic polymerization of predominantly indene and other aromatic monomers. This additive exhibit low volatile organic compounds, low odor and improved resistance to acids, alkali & moisture. It offers good thermal stability, improved leafing and brilliance. CUMAR® 130 is used in solvent-based adhesives, construction adhesives and sealants. It complies with FDA 175.105, FDA 176.170, FDA 176.180, FDA 177.1210 and TSCA regulation. CUMAR® 105 by Neville Chemical is a low molecular weight, hydrocarbon resin-based tackifier. It is produced by catalytic polymerization of predominantly indene and other aromatic monomers. It acts as a processing aid and tackifier for tire and rubber compounds. This additive exhibit low volatile organic compounds, low odor, good thermal stability, and acid-, alkali- & improved moisture resistance. It improves scorch time and shows compatibility with short, medium & long oil alkyds. CUMAR® 105 is used in construction adhesives and sealants. It complies with FDA 175.105 and TSCA regulation. CUMAR® R-13 by Neville Chemical is 100% aromatic, inert and non-saponifiable coumarone-indene resin-based tackifier. It is used in adhesives. CUMAR® R-13 exhibits good resistance to alkalis, dilute acid, moisture and oxidation. CUMAR® LX-509 by Neville Chemical is coumarone-indene resin-based tackifier. It is used in adhesives. CUMAR® LX-509 exhibits good resistance to alkalis, dilute acids, and moisture. CUMAR® R-29, 10° by Neville Chemical is hydrocarbon resin-based tackifier with low softening point. It is used in hot-melt adhesives. CUMAR® R-29, 10° exhibits resistance against oxidation, moisture, alkali and dilute acids. CUMAR® R-3 by Neville Chemical is 100% aromatic in content, inert and non-saponifiable coumarone-indene resin-based tackifier. It is used in adhesives. CUMAR® R-3 exhibits good resistance to alkalis, dilute acid, moisture and oxidation. CUMAR® R-27, 10° by Neville Chemical is hydrocarbon resin-based tackifier, with low softening point. It exhibits resistance against oxidation, moisture, alkali and dilute acids. CUMAR® R-27, 10° is used in hot-melt adhesives. CUMAR® R-21 by Neville Chemical is a stable, low softening point coumarone-indene resin-based tackifier. It is used in adhesives. CUMAR® R-21 exhibits resistance to alkali, salts and dilute acids.
CUMAR®
Adhesive ingredients supplied by Neville Chemical