Kanamoll- 620 by KLJ Group is an epoxidized soyabean oil grade. It acts as a good hydrochloric acid scavenger and as a secondary heat & light stabilizer. It also acts as co-stabilizing internal lubricant in rigid PVC formulations and as a plasticizer. It is recommended for adhesives and sealants. It is compatible with PVC, PVA, nitro cellulose and chlorinated rubber etc. It provides improved adhesion, toughness, glossiness, non-toxicity, cost reduction, environmental friendliness and chemical resistance. Recommended dosage of this grade for plasticized PVC is 2-5 PHR and for rigid PVC is 1-3 PHR. Kanamoll- 620 is approved by REACH.
KANATOL -DPGB 50 by KLJ Group is a mixture of di-propylene glycol di-benzoate and di-ethylene glycol di-benzoate by KLJ Group. It is a primary high solvating plasticizer for PVC & polyvinyl acetate adhesives. It offers tailoring of adhesive systems with excellent wet tack, good adhesion, clear liquid, stable properties and high boiling point. It shows good compatibility with DOP. K-DPGB 50 is recommended for EVA/PVAc water based adhesives. It provides fast & low temperature processing and excellent stain & extraction resistance to aliphatic solvents. The shelf life of KANATOL -DPGB 50 is 24 months. It is suitable for acrylic latex caulk formulations.
DIDP by KLJ Group is diisodecyl phthalate. It acts as plasticizer. It is almost colorless and odorless oily liquid, free of foreign materials which is insoluble in water but soluble in organic solvents. DIDP is used in adhesives and sealants.
