Return to supplier page
ERISYS® RDGE-H by Huntsman is a high purity resorcinol diglycidyl ether, low viscosity aromatic difunctional epoxy resin. It is used in conductive adhesives. It possesses compatibility with all standard curatives, most resin systems and solvents. ERISYS® RDGE-H can be used as a modifier in epoxy or other resins. It offers very good strength and low shrinkage characteristics, maximum retention of physical properties and chemical resistance. ERISYS® GE-5 by Huntsman is the monofunctional glycidyl ether of butyl alcohol. It is used as a diluent for epoxy resins in adhesives. It reduces viscosity. It provides increased filler loading, improved substrate wetting, fast gel times and good degree of cure. ERISYS® GE-5 is used in construction anchor bolt adhesives. ERISYS® GE-12 by Huntsman is ether of nonyl phenol. Used as a reactive diluent in adhesives and sealants. It offers compatibility with all epoxy resins. It can be cured with most conventional amine, anhydride or catalytic curing agents. It does not adversely affect cure speed. It improves mechanical properties. ERISYS® GE-12 can be used as a very good compatibilizer for epoxy resins and aliphatic curing agents, reducing mixing time and blushing problems. ERISYS® GE-24 by Huntsman is a low viscosity, relatively high equivalent weight diepoxide of an aliphatic polyglycol. It is used as a diluent and flexibilizer in high viscosity, brittle epoxy formulations in adhesives. It reduces viscosity for improved substrate wetting and higher filler loading. It improves elongation, peel strength and resistance to thermal cycling and impact. It decreases chemical and heat resistance. ERISYS® GE-24 is used in automotive, electric potting & encapsulation, construction (grouts) adhesives. ERISYS® GS-120 by Huntsman is dimer acid diglycidyl ester. It imparts a degree of flexibility to normally rigid epoxy systems. It offers increased toughness and tensile elongation. It exhibits improved impact and thermal shock resistance. ERISYS® GS-120 is used in adhesives and joint sealants. ERISYS® GE-35H by Huntsman is a special grade of the triglycidyl ether of castor oil. It is a low viscosity polyepoxide resin which imparts flexibility, impact resistance and thermal shock resistance to epoxy formulations. It is universally compatible with standard Bisphenol-A epoxy resins. It has a low vapor pressure and a mild non-offensive odor. ERISYS® GE-35H is used in construction joint fillers (concrete and asphalt) adhesives and sealants. ERISYS® GE-11 by Huntsman is an epoxidized para-tertiary butyl phenol. It is used as a reactive diluent for high viscosity epoxy resins in adhesives. It possesses compatibility at all concentrations with those resins and any curing agent for epoxy resins. It provides very good moisture resistance, low vapor pressure, low odor and very low residual epichlorohydrin level. It reduces tendency of certain epoxy resins to crystallize. ERISYS® GE-11 is recommended for applications such as concrete, civil engineering and general purpose adhesives. ERISYS® GE-36 by Huntsman is triglycidyl ether of propoxylated glycerin. It is a flexibilizing diluent for epoxy resins. It is compatible with standard Bisphenol-A, Bisphenol-F and epoxy phenol novolac resins. It provides increased tensile elongation, improved impact, thermal shock and peel adhesion. ERISYS® GE-36 is used in joint sealants and adhesives. ERISYS® GE-31 by Huntsman is triglycidyl ether of trimethylolethane. It acts as a reactive diluent for high viscosity epoxy resins. It is a low viscosity aliphatic triepoxide. It helps to produce cured formulations with higher cross-link density suggesting use in applications requiring enhanced chemical resistance. ERISYS® GE-31 is also used in high performance adhesives applications. ERISYS® GE-35 by Huntsman is the triglycidyl ether of castor oil. It is a low viscosity polyepoxide resin which imparts flexibility, impact resistance and thermal shock resistance to epoxy formulations. It is universally compatible with standard Bisphenol-A epoxy resins. It has a low vapor pressure and a mild non-offensive odor. ERISYS® GE-35 is used in construction joint fillers (Concrete and Asphalt) adhesives and sealants.
ERISYS®
Adhesive ingredients supplied by Huntsman