Return to supplier page
Dynol™ 960 by Evonik is a siloxane based surfactant. It acts as a superwetting agent. Contains no added hazardous air pollutants (HAPs), alkylphenol ethoxylates (APEs) and volatile organic compounds (VOCs). It provides a superior balance of equilibrium, dynamic wetting, system compatibility and low foam when compared to traditional siloxane surfactants. Primarily recommended for high-quality waterborne adhesives and 100% two-pack systems. Dynol™ 960 is partially suitable with solvent based and radiation curing systems. Recommended use level of this grade is 0.1 - 1.0%. Dynol™ 800 by Evonik is a 100% active, non-silicone, non-fluorine, low foam superwetter/surfactant. It contains no added APEs, HAPs or VOCs. It provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants. It has the ability to reduce both equilibrium and dynamic surface tension to levels not achieved with other surfactants. This excellent balance of properties makes it an excellent alternative for difficult-to-wet substrates requiring good flow and leveling under diverse application conditions. Recommended use level of Dynol™ 800 is 0.1 -1.0%. It is partially suitable with solvent-borne and radiation curing systems and completely suitable with water-based and two-pack (100%) systems. Dynol™ 980 by Evonik is a siloxane-based surfactant. It acts as a superwetting agent. It contains no added hazardous air pollutants (HAPs), alkylphenol ethoxylates (APEs) and volatile organic compounds (VOCs). Provides a superior balance of equilibrium, dynamic wetting, system compatibility and low foam when compared to traditional siloxane surfactants. Dynol™ 980 is recommended for high-quality waterborne adhesives. Dynol™ 607 by Evonik is an ethoxylated acetylenic gemini surfactant and substrate wetting agent. It is used in adhesives. It offers very good flow and levelling, no recoatability, non-persistent foam, improved formulation compatibility and ease of incorporation.<br>
<ul style="padding-left: 40px;"><li>Dynol™ 607 is free of APEO and VOC.</li>
<li>It is a cost effective grade with recommended addition level of 0.1-1.0%.</li>
<li>It has a shelf life of 60 months.</li></ul> Dynol™ 604 by Evonik is an ultra low-VOC, low-foam, non-ionic wetting agent and surfactant. It is suitable for use in waterborne systems like adhesives and concrete sealants.<br>
<ul style="padding-left: 40px;"><li>Possesses low foam and low water-sensitivity properties.</li>
<li>Offers enhanced dispersion quality and increased stability.</li>
<li>Suitable for two-component (100%), solvent-borne, and radiation curing systems.</li>
<li>The recommended addition level for Dynol™ 604 is 0.1 - 1.0%. </li></ul> Dynol™ 810 by Evonik is a low foam superwetter/surfactant. It is a 100% active grade with no silicone and fluorine content. Contains no added APEs, HAPs or VOCs. It is completely suitable with water based and 100% two-pack systems. Provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants. Has the ability to reduce both equilibrium and dynamic surface tension to levels not achieved with other surfactants. This excellent balance of properties makes it an excellent alternative for difficult-to-wet substrates requiring good flow and leveling under diverse application conditions. Dynol™ 810 has a recommended use level of 0.1 - 1.0%. Partially suitable with solvent borne and radiation curing systems.
Dynol™
Adhesive ingredients supplied by Evonik
6 Products match your search
Dynol™ 960
by Evonik
Dynol™ 800
by Evonik
Dynol™ 980
by Evonik
Dynol™ 607
by Evonik
Dynol™ 604
by Evonik
Dynol™ 810
by Evonik
Showper page