Return to supplier page
DYNAPOL® L 490 by Evonik is hydroxylated, saturated polyester resin. It is used in hot laminating adhesives. DYNAPOL® L 490 offers benefits such as good mechanical properties, good reactivity and high solids content. DYNAPOL® L 208 by Evonik is hydroxylated, saturated polyester resin. It is used in hot laminating adhesives. DYNAPOL® L 208 offers benefits such as good mechanical properties, good reactivity and high solids content. DYNAPOL® L 411 by Evonik is a high molecular saturated polyester resin. It is used in hot laminating adhesives. It exhibits good adhesion and good hardness and flexibility balance. It offers good mechanical properties, good reactivity and high solids content. DYNAPOL® L 411 complies with FDA §175.300. DYNAPOL® S 1227 by Evonik is a semi-crystalline, saturated, linear copolyester resin. It is used as hot-melt adhesives for fabric and textile lamination e.g. for clothes or automotive interiors. DYNAPOL® S 1227 is suitable for direct extrusion or preparation of adhesive films, nets and webs. DYNAPOL® S 1272 by Evonik is a semi-crystalline, saturated, linear copolyester resin. It is used as hot-melt adhesives for fabric and textile lamination e.g. for clothes or automotive interiors. DYNAPOL® S 1272 is suitable for direct extrusion or preparation of adhesive films, nets and webs. DYNAPOL® S 1427 by Evonik is a high molecular weight, amorphous, thermoplastic copolyester. It is used as a raw material for hot melt industrial adhesives. It offers low water uptake. DYNAPOL® S 1427 provides good solubility in many solvents and adhesion to copper, aluminium, steel, polyester films and PVC. DYNAPOL® S 394 by Evonik is a high molecular weight, highly crystalline, thermoplastic copolyester. It is used as a raw material for hot melt industrial adhesives and offers low water uptake. DYNAPOL® S 394 provides short open time, high heat resistance, good solvent and chemical resistance, and adhesion to paper and cardboard. DYNAPOL® S 1548 by Evonik is a high molecular weight, moderately crystalline, thermoplastic copolyester. It is used as a raw material for hot melt industrial adhesives and offers low water uptake. DYNAPOL® S 1548 provides moderate open time, good adhesive strength, still good heat resistance and adhesion to textiles, leather, paper and cardboard. DYNAPOL® S 320 high molecular weight, moderately crystalline, thermoplastic copolyester. It is used as a raw material for hot melt industrial adhesives and offers low water uptake. It provides moderate open time, good adhesive strength and good heat resistance. DYNAPOL® S 320 shows adhesion to copper, aluminium, steel, polyester films, textiles, leather, paper and cardboard. DYNAPOL® S 1218 by Evonik is saturated, linear copolyester. It is used in hot melts and as solvent based adhesives. DYNAPOL® S 1218 is suitable for fabrics and technical textile lamination e.g. for clothes or automobile interiors.
DYNAPOL®
Adhesive ingredients supplied by Evonik
34 Products match your search
DYNAPOL® L 490
by Evonik
DYNAPOL® L 208
by Evonik
DYNAPOL® L 411
by Evonik
- Sustainable option