REACH

Resi4preg by ResiCare is a unique biobased araminolic resin for preimpregnated application, free of formaldehyde replacing phenolics one developed according to REACH legislation and local regulation for workers safety.

• With biobased raw materials, Resi4preg contributes to company's sustainable strategy and petroleum resources independence.
• It is a solvent-based resin primarily processed using autoclave thermocompression.
• It is compatible with fiberglass, carbon fiber, linen, and kevlar reinforcements.
• It offers excellent thermal resistance, making it suitable for automotive, aeronautics, leisure, railway, and sandwich panel applications including buildings, cold storage, and battery packs.
• It is used in adhesives applications.
• It has a shelf life of 6 months under recommended storage conditions.

Resi4Friction by ResiCare is a unique araminolic resin for friction application free of formaldehyde replacing phenolics one developed according to REACH legislation and local regulation for workers safety.

• It is phenol-free formulation with high coke rate.
• Its main cross-linking method is thermocompression.
• Resi4Friction is used in brake pads, brake linings clutch facings, abrasives and adhesives applications.
• It has a shelf life of 6 months.

Resi4Ablation by ResiCare is a unique biobased aranolic resin with high thermal properties replacing phenolics one developed according to REACH legislation for workers safety with high ablative and charring properties.

• It is formol-free and phenol-free formulation with high coke rate.
• It is primarily processed through impregnation, with cross-linking achieved by thermocompression.
• Resi4Ablation is used in molded composites, atmospheric re-entry bodies, high temperature-resistant furnace parts and adhesives applications.
• It has a shelf life of 15 days at 23°C.

Resi4Carbon/Carbon by ResiCare is a unique biobased, aqueous aranolic resin for carbon/carbon composite with high thermal properties replacing phenolics one developed according to REACH legislation for workers safety with high ablative and charring properties.

• It is formol-free and phenol-free formulation with high coke rate.
• It is primarily processed through impregnation, with cross-linking achieved by oven curing and pyrolysis.
• Resi4Carbon/Carbon is used in brake pads, heat exhangers, rockets and adhesives applications.
• It has a shelf life of 15 days at 23°C.

ADEKA REASOAP SR-1025 by ADEKA is an APEO-free, ether sulfate type reactive anionic surfactant. It offers low foaming, fast defoaming and enhanced mechanical- and chemical stability of latex. It imparts hydrophobic properties and allows prevention of static charge depending on the formulation.

• It is also used as a resin modifier and emulsifier for emulsion polymerization.
• It provides improved adhesion, water- and corrosion resistance and transparency of polymer film.
• ADEKA REASOAP SR-1025 is designed for use in adhesives.
• It complies with FDA 21 CFR 175.105 and 175.125 regulations.

ADEKA REASOAP SR-10 by ADEKA is an APEO- and preservative-free, reactive anionic surfactant of ether sulfate type. It acts as a resin modifier and emulsifier for emulsion polymerization. It offers low foaming, fast defoaming and enhanced mechanical- & chemical stability of latex.

• It provides improved adhesion, water- & corrosion resistance and transparency of polymer film.
• It imparts hydrophobic properties and allows prevention of static charge depending on the formulation.
• ADEKA REASOAP SR-10 is suitable for use in adhesives.
• It is in compliance with FDA 21 CFR 175.105 and 175.125 regulations.

ADEKA REASOAP ER-10 by ADEKA is an APEO- and preservative free, reactive non-ionic surfactant. It acts as a resin modifier and emulsifier for emulsion polymerization. It enhances physical properties and transparency of resin film.

• It offers low foaming, fast defoaming and enhanced mechanical & chemical stability of latex.
• It provides improved water- and corrosion resistance & adhesion on substrate.
• It imparts hydrophobic properties and allows prevention of static charge depending on the formulation.
• ADEKA REASOAP ER-10 is recommended for use in adhesives.
• It is compliant with FDA 21 CFR 175.105 and 175.125 regulations.

AOMA™ by Nippon Shokubai is a low viscosity methyl 2-((allyloxy)methyl) acrylate monomer and exhibits high dilutability, excellent dispersibility and quick UV curability & reactivity.

• It offers flexibility, improved wettability, penetration, easier application & handling, smooth finish, enhanced processability and cost effectiveness.
• It has the ability to be copolymerized with other monomers to tailor the properties of the adhesive to specific applications, such as varying the glass transition temperature (Tg), tack and resistance to chemicals, heat and UV light.
• It provides faster curing times, energy efficiency, impact resistance, waste reduction, durability, consistency & reliability, improved aesthetics, long term stability and improved safety.
• It facilitates high solid formulations and enables the addition of more fillers or reinforcements.
• It shows toughness and excellent adhesion to various organic and inorganic substrates, making it ideal for bonding different types of substrates.
• It can be used in UV-curable adhesives for electronic materials.
• It is compatible with glass, aluminum, copper, ITO evaporated glass, silicon wafer, PMMA, PC, ABS and PET-, PA-, COP-, EVA-, TAC- and specialty acrylate films.
• AOMA™ is suitable for high performance adhesives and sealant applications.
• It is registered in US, EU, Japan, China, South Korea and Taiwan.

Bentone® GS by Elementis is a beneficiated powdered smectite clay-based rheological additive. It is specifically developed for water-borne construction systems. It imparts thixotropy and limits the separation. It provides thermostable viscosity control of the aqueous phase.

• It enhances texturing & stippling effects and improves workability/application of plasters.
• It reduces the surface drag so that an enhanced finish is achieved.
• It is suitable for adhesive applications.
• It is mainly used in (lime) cement plasters, gypsum plasters, repair mortars, self-leveling floors, cement mortars and concrete applications.
• Recommended dosage level of Bentone® GS is 0.03% to 0.25% (of the total powder).
• It has a shelf life of 4 years.
• It is listed with TSCA, EINECS, EU REACH, DSL, ENCS, PICCS, KECL, IECSC, AICS, NZIoC, and NECI.

ADEKA REASOAP SR-2090 by ADEKA is an APEO- and preservative-free, reactive anionic surfactant of ether sulfate type. It acts as a resin modifier and emulsifier for emulsion polymerization. It offers low foaming, fast defoaming and enhanced mechanical- & chemical stability of latex.

• It provides improved adhesion, water- & corrosion resistance and transparency of polymer film.
• It imparts hydrophobic properties and allows prevention of static charge depending on the formulation.
• ADEKA REASOAP SR-2090 is suitable for use in adhesives.
• It complies with FDA 21 CFR 175.105 and 175.125 regulations.