PFAS-free

Suberinno Suberin™ by Innomost is a biobased, nature’s high-performance biopolymer. It is a complex polyester found naturally in the bark of birch and other plants. It functions as a protective barrier in trees by repelling water, resisting microbial attacks and preventing moisture loss.

• It is designed to provide exceptional water and grease resistance for improved product protection and longevity.
• It deliver performance without any PFAS chemical.
• It is suitable for use in packaging, adhesive due to its multifunctional properties.
• It helps extend shelf life and preserve product integrity by creating robust moisture and grease barriers.
• It also provides a natural protective barrier against chemical, microbial and environmental stressors including oxidation and thermal degradation.
• It is produced from renewable, upcycled birch bark, supporting sustainable and circular economy initiatives.
• It is non-toxic, biodegradable and fossil free, aligning with increasing demands for safer and greener materials.
• It helps reduce the carbon footprint by replacing synthetic, petrochemical based additives and binders.

BYK® 1693 SD by BYK is a bio-based, VOC-, mineral oil-, silicone-, PFAS-free powder defoamer. It is used in aqueous, mineral and dispersion-based building material formulations. It minimizes the environmental footprint while meeting the highest performance standards.

• It reduces the air void content and improves the properties of the fresh mortar as well as the physical properties of the hardened system.
• It shows good compatibility with different binder systems.
• It has increased flexural, compressive strength and strong & long-lasting defoaming performance.
• It is used in waterproofing membranes (polymer cement mortar (PCM)), concrete repair mortar (polymer cement concrete (PCC)) and tile adhesives.
• The recommended usage level of BYK® 1693 SD is 0.05-0.5%.
• It has a shelf life of 18 months.
• BYK® 1693 SD complies with REACH.

BYK® -1810 by BYK is a PFAS-free, silicone-containing defoamer. It is used in solvent-based and solvent-free adhesive systems. It is recommended for systems based on polyurethane and epoxy resins. It achieves optimal defoaming and good compatibility.

• It is recommended for adhesives and sealants.
• The recommended usage level of BYK® -1810 is 0.1-1%.
• It has a shelf life of 36 months.
• BYK® -1810 complies with REACH.

BYK® -1811 by BYK is a PFAS-free, silicone-containing defoamer. It is used in solvent-borne and solvent-free adhesive systems. It is especially recommended for systems based on polyurethane and epoxy resins. It offers good storage stability, spontaneous defoaming even at low dosage levels. It prevents pinholes and reduces surface tension.

• It exhibits a positive influence on leveling and surface appearance.
• It is recommended for adhesives and sealants.
• The recommended usage level of BYK® -1811 is 0.1-1%.
• It has a shelf life of 36 months.
• BYK® -1811 complies with REACH.

BYK® -1815 by BYK is a PFAS-free, silicone-containing defoamer. It is used in solvent-borne and solvent-free adhesive systems. It is especially recommended for systems based on polyurethane and epoxy resins. It offers good storage stability, spontaneous defoaming even at low dosage levels. It prevents pinholes and reduces surface tension.

• It exhibits a positive influence on leveling and surface appearance.
• It is recommended for adhesives and sealants.
• The recommended usage level of BYK® -1815 is 0.1-1%.
• It has a shelf life of 36 months.
• BYK® -1815 complies with REACH.

PlastiLynx PXN by XLynX Materials is a multifunctional, PFAS-free universal primer for polyolefin materials that enables strong adhesion. It is a diazirine-grafted polyamine crosslinker designed for hard to bond polymers with low surface energy. It forms a permanent, non-damaging layer of covalent bonds along the surface of the substrate which is acceptable for all types of adhesives when cured with heat or UV light.

• PlastiLynx PXN can be used in combination with other commercially available adhesives such as cyanoacrylates, polyurethanes and epoxies etc.
• It is designed to work with polyethylene, polypropylene, PET, PA and PVC etc.
• Recommended for interfacial adhesive for composites and other adhesive applications.
• It is non-hazardous & non-toxic and has a shelf-life of 4 years when freezer stored.