Vercet™ A1000 by NatureWorks is a thermoplastic adhesive-grade resin derived from renewable resources. It is designed for use as an adhesive component in formulated products where an amorphous/low melting, high-flow resin is desired. It is effectively used in solvent-borne, hot-melt adhesives, carton-case and packaging adhesive, heat seal applications. The recommended moisture content to prevent viscosity degradation and potential loss of properties is less than 0.005% (50 ppm). Typical drying conditions for Vercet™ A1000 are 8-12 hours at 40°C [104°F] with a dew point of -35°C [-30°F], with an airflow rate of greater than 0.5 cfm/lbs per hour of resin throughput.
| Bio Based | Visible After Login |
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
For which system
Availability
Product Status:Visible After Login
Vercet™ A1000 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Glass Transition Temperature (Tg) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt index @ 210°C, ASTM D1238 | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity, Relative | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Solubility Properties | Element | Condition | Method |
|---|---|---|---|
| Soluble in | Visible After Login | ||
| Soluble in | Visible After Login | ||
| Soluble in | Visible After Login |