SEETEC UC404 is a linear low density polyethylene (95-100%). Exhibits good silane crosslinking processability. Suitable for hot-melt adhesives.
| CAS Number | Visible After Login |
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
For which system
Availability
Product Status:Visible After Login
SEETEC UC404 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Auto-ignition Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Brittleness Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Dielectric constant, 20µm, ASTM D150 | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Dielectric strength, 20µm, ASTM D149 | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Dissipation factor, 20µm, ASTM D150 | 0.0 Visible After Login | Visible After Login | Visible After Login |
| ESCR, 20µm, ASTM D1693 | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strain (Break), 20µm, ASTM D638 | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Stress (Yield), 20µm, ASTM D638 | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Volume resistance, 20µm, ASTM D257 | 0.0 Visible After Login | Visible After Login | Visible After Login |