FOAM BLAST® 389 by DyStar Is mixture. It ats as a non-silicone defoamer. Possesses good tolerance for electrolytes, high dispersibility and compatibility. It forms a stable emulsion upon dilution. Offers enhanced foam control in a wide range of adhesive formulations. FOAM BLAST® 389 is mostly used in water-based latex adhesives and caulks. It complies with OSHA, TSCA and DSL regulations. All components are in compliance with FDA regulation 21 CFR: 175.105, 176.210 and 178.3120.
Product family:
Chemical family:
Product Type:
| Chemical Composition: | Visible After Login |
| Bio Based content | Visible After Login |
| Color | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
For which system
Availability
Product Status:Visible After Login
FOAM BLAST® 389 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flash Point, Closed Cup | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Volatile Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Volatile Organic Content | 0.0 Visible After Login | Visible After Login | Visible After Login |