Imide Monomers for Adhesives and Sealants

BMI -3000 (50% Toluene) by Designer Molecules is an amorphous, low molecular weight, imide-extended bismaleimide oligomer. It is used as a toughener. It exhibits excellent low pH hydrolytic resistance, excellent flexibility and thermal stability. It is soluble in most aromatic and aliphatic solvents such as toluene and NMP and forms very tough, hydrophobic polyimides on curing. When used as a base resin, BMI -3000 (50% Toluene) can produce films that are tough, flexible and demonstrate good peel strength. It's recommended for use in film adhesives, pre-applied adhesives and for adhesion to metals.

BMI -3000 GEL by Designer Molecules is an amorphous, low molecular weight, imide-extended bismaleimide oligomer. It exhibits excellent flexibility, excellent hydrolytic stability, excellent adhesion to a variety of substrates and thermal stability. It is hydrophobic in nature and is used as a toughener. It is soluble in most aromatic and aliphatic solvents such as toluene, NMP, etc. BMI -3000 GEL is compatible with and can be incorporated directly into many resin systems for enhanced performance. When used as a base resin, it can produce films that are tough, flexible and demonstrate good peel strength. It is recommended for use in film adhesives, pre-applied adhesives and for adhesion to metals.

BMI -5000 by Designer Molecules is an imide-extended bismaleimide oligomer. It exhibits excellent toughness in the cured state with an intermediate cross-link density. It is non-tacky, and can be cured thermally, via UV irradiation, or in the presence of free-radical initiators to form a tough thermoset. BMI -5000 is soluble in aromatic and aliphatic solvents such as toluene, nmp, etc. and can be processed in a resin system as a solid or dissolved in a solvent. When used as a base resin, it can produce films that are tough, flexible and demonstrate good peel strength. Recommended for use in film adhesives and thermally resistant adhesives.

BMI -5000 (50% in Toluene) by Designer Molecules is an imide-Extended Bismaleimide Oligomer (50% Toluene). Exhibits excellent toughness in the cured state with an intermediate cross-link density. It can be cured thermally, via UV irradiation, or in the presence of free-radical initiators to form a tough thermoset. BMI -5000 (50% in Toluene) is an amber, waxy solid at room temperature and can be cast as a hot melt or from solution to form pliable, non-tacky films. Can also be supplied as a solid slab, powdered solid, or in alternative solvents. When used as a base resin, it can produce films that are tough, flexible and demonstrate good peel strength. Recommended for use in film adhesives and thermally resistant adhesives.

Homide 127A by HOS-Technik is monomaleimide with reactive group suitable for polymerization. The short-chain homide is a monomaleimide derivative that can be polymerized by heat or catalysts. Homide 127A is primarily used in composite materials where temperature stability is an important criterion and in adhesives.

Homide 122 by HOS-Technik is monomaleimide with reactive group suitable for polymerization. The short-chain homide is a monomaleimide derivative that can be polymerized by heat or catalysts. In addition shows increase in the thermal stability of the copolymers produced and improves the surface and UV stability. Homide 122 is used in adhesives.

Homide 108 by HOS-Technik is 2.6-Xylylmaleimide. Monomaleimide with reactive group suitable for polymerization. The short-chain homide is a monomaleimide derivative that can be polymerized by heat or catalysts. In addition shows increase in the thermal stability of the copolymers produced and improves the surface and UV stability. Homide 108 is used in adhesives.

Homide 400 by HOS-Technik is monomaleimide with reactive group suitable for polymerization. The short-chain homide is a monomaleimide derivative that can be polymerized by heat or catalysts. In addition shows increase in the thermal stability of the copolymers produced and improves the surface and UV stability. Homide 400 is used in adhesives.

Homide 250 by HOS-Technik is monomaleimide with reactive group suitable for polymerization. The short-chain homide is a monomaleimide derivative that can be polymerized by heat or catalysts. In addition shows increase in the thermal stability of the copolymers produced and improves the surface and UV stability. Homide 250 is used in adhesives.

Homide 125 by HOS-Technik is monomaleimide with reactive group suitable for polymerization. The short-chain homide is a monomaleimide derivative that can be polymerized by heat or catalysts. In addition shows increase in the thermal stability of the copolymers produced and improves the surface and UV stability. Homide 125 is used in adhesives.