All Heat Stabilizers for Adhesives and Sealants

Kanamoll- 620 by KLJ Group is an epoxidized soyabean oil grade. It acts as a good hydrochloric acid scavenger and as a secondary heat & light stabilizer. It also acts as co-stabilizing internal lubricant in rigid PVC formulations and as a plasticizer. It is recommended for adhesives and sealants. It is compatible with PVC, PVA, nitro cellulose and chlorinated rubber etc. It provides improved adhesion, toughness, glossiness, non-toxicity, cost reduction, environmental friendliness and chemical resistance. Recommended dosage of this grade for plasticized PVC is 2-5 PHR and for rigid PVC is 1-3 PHR. Kanamoll- 620 is approved by REACH.

Irganox® PS 800 FL by BASF is didodecyl 3,3'-thiodipropionate. It is a heat stabilizer in combination with a phenolic antioxidant. Used for polyethylene- & XLPE power cables, HDPE pipe and polyolefin resin. Also used for under-hood automotive applications, styrene homo- and copolymers. The recommended dosage level is 0.05-0.1% and in peroxide cross linked power cables is 0.02-0.03% in combination with 0.02 % – 0.03 % Irganox 1035. It is approved for food contact applications. Irganox® PS 800 FL is listed in AICS, EINECS, PICCS, DSL, MITI, TSCA and ECL.

Irganox® B 612 by BASF is a blend of 66.7% Irgafox® 168 and 33.3% Irganox® 565. Acts as a processing and long-term thermal stabilizer. Maintains original melt flow and offers low color formation. Provides long-term-thermal stability. Irgafox® 168, an organic phosphite of low volatility and particularly resistant to hydrolysis, protects the polymers which are prone to oxidation. Irganox® 565, a hindered phenolic antioxidant, contributes synergistically to polymer stabilization during processing and provides long-term thermal stability by preventing thermo-oxidative degradation. Irganox® B 612 is compatible with styrene homo- and copolymers, polyolefin homo- and copolymer, elastomers such as BR, IR, NBR, SBS, SIS, SEBS, SBR, EPDM, and NR. Its recommended dosage is 0.3-1.0%. It is registered in Australia, Canada, China, EU, Japan, Korea, Philippines and USA.

OPTIMINE™ 95 by Advancion (formerly ANGUS) is a highly efficient stabilizer, pigment co-dispersant and neutralizer. It offers thermal stability, resistance to yellowing, enhanced rheology stability and resistance to corrosion and flash-rust. It is readily biodegradable, compatibilizer and stabilizer for emulsions and water-based formulations. It is used in building, constructions, adhesives and sealants.

Irganox® PS 800 by BASF acts as a heat stabilizer and phenolic antioxidant. It is dialkyl ester of thiodipropionic acid used in adhesives for polyethylene power cables, XLPE power cables, HDPE pipe, polypropylene, polyolefin under-hood automotive applications, styrene homo- and copolymers.

• It offers activity over broad temperature range (RT to melt), improved long-term stability, non-regenerative mechanism and consumption during reaction.
• It is designed to protect against high temperature aging.
• Its recommended dosage level is 0.05-0.1% and 0.02-0.03% in crosslinked power cables.
• Irganox® PS 800 is approved for use in food contact applications.
• It is listed in AICS, EINECS, PICCS, DSL, MITI, TSCA and ECL.

NAUGARD™ ULTRA Q by SI Group is an antioxidant. It is an effective processing and long-term heat stabilizer for a variety of application areas in LDPE, LLDPE, HDPE and ethylene-propylene copolymers. NAUGARD™ ULTRA Q is used in wire & cable, adhesives and consumer products.

CALCIUM STEARATE CSS by Polytrans acts as a stabilizer. It is available as solid in powder form. It has applications in adhesives.

CALCIUM STEARATE CSM by Polytrans acts as a stabilizer. It is available as solid in powder form. It has applications in adhesives.

CALCIUM STEARATE CSE by Polytrans acts as a stabilizer. It is available as solid in powder form. It has applications in adhesives.

Stearyl-3-(3’,5’-di-tert-butyl-4-hydroxyphenyl) propionate. Acts as an organotin-free, sterically hindered phenolic antioxidant and effective, non-discoloring stabilizer. It provides excellent long-term heat stability by preventing thermo-oxidative degradation during processing and service life. It also provides good compatibility with resins and excellent extraction resistance. It is easily incorporated by melting techniques due to its low melting point and offers reduced health and environmental concerns. It enables excellent resistance to extraction, low volatility, improvement of long-term stability and ease of compatibility with other stabilizers. Used in elastomers and hot-melt adhesives. The recommended dosage is 0.2%-1% in hot-melt adhesives. Approved by FDA.