Driers / Dessicants for Adhesives and Sealants

D-60 by HUBEI BLUESKY NEW MATERIALS acts as a crosslinking and drying agent. D-60 is a highly reactive, titanium chelate complex. It is a blend of di (1,3- propanediol) bis(ethyl acetoacetate) titanium and methyltrimethoxysilane. The high reactivity of D-60 at low temperature enables it to react with common functional groups such as R-OH, M-OH, Si-OH, or R-COOH at low temperature to effect crosslinking, adhesion promotion, and cure rate. It can be used with silanol end-capped polymers, such as polypropylene oxides, polyurethanes, and acrylates. It is miscible in most organic solvents and decomposes in water. Recommended for adhesives and sealants.

ALBERDINGK® Albolith MS C 350 Molecular Sieve Paste by Alberdingk Boley is a castor oil derivative. Acts as a desiccant. It is mainly composed of ricinoleic acid, a glyceride that does not otherwise occur in nature and is difficult to synthesize, it is characterized by a hydroxyl group and an isolated double bond. It is highly soluble in alcohol and has a viscosity twenty times greater than that of any other fat or oil of vegetable or animal origin. It is low viscous, not sedimenting and pot life stable. ALBERDINGK® Albolith MS C 350 Molecular Sieve Paste is used in PU adhesives.

MicroCal® OXP by MLC is an extremely pure calcium oxide dessicant drier suitable for adhesives. It is utilized as a raw material for many chemical and environmental processes that require a highly reactive product. MicroCal® OXP is listed with AICIS, DSL, IECSC, EINECS, ENCS, ECL, New Zealand Inventory, PICCS, TCSI, TSCA and SARA 311/312 Hazardous chemicals.

MicroCal® OFT15 by MLC is an extremely pure calcium oxide-based dessicant drier. It is utilized as a raw material for many chemical and environmental processes that require a highly reactive product. It is suitable for adhesives. MicroCal® OFT15 is listed with AICIS, DSL, IECSC, EINECS, ENCS, ECL, New Zealand Inventory, PICCS, TCSI, TSCA and SARA 311/312 Hazardous chemicals.

PolyCal® OFT15 by MLC is an extremely pure calcium oxide-based dessicant drier. It is utilized as a raw material for many chemical and environmental processes that require a highly reactive product. It is suitable for adhesives. PolyCal® OFT15 is listed with AICIS, DSL, IECSC, EINECS, ENCS, ECL, New Zealand Inventory, PICCS, TCSI, TSCA and SARA 311/312 Hazardous chemicals.

inlime by Eurominerals is an ultrafine ground quicklime (calcium oxide)-based desiccant agent. It has high level of purity, small particle size, low and well-controlled top-cut. It offers reduction of defects (blistering, pin holes, bubbling, etc), powerful reactivity, effectivity and high moisture absorption. inlime is recommended for adhesives and sealant formulations.

Rhenogran® CaO-80 by Lanxess is a desiccant for rubber compounds of all kinds to prevent porosity in extruded seals. It is a blend of 80% calcium oxide, 20% elastomer binder and dispersing agents. It offers quick absorption and very good dispersion. It provides more uniform cell structure. The dosage level of the grade is 2-10 phr. The storage stability Rhenogran® CaO-80 is 365 days.

Rhenofit® C by Lanxess is a desiccant in rubber compounds for extruded seals. The composition of this grade is 95% calcium oxide coated with 5% special dispersing agents. It offers prevention of porosity. The dosage level of Rhenofit® C is 2-10 phr.

Precomplexed calcium. Acts as an auxiliary drier. It is environment-friendly and available at a very reasonable price. Provides water-, corrosion-, heat- and abrasion resistance. Used in pavement sealants.

Precomplexed cobalt preparation. Acts as a drying control agent. It is environment-friendly and available at a very reasonable price. Provides water-, corrosion-, heat- and abrasion resistance. Used in pavement sealants.