Amino Resins for Adhesives and Sealants

Genamin® M 41/2000 by Clariant is a multifunctional methyl polyalkylene oxide monoamine. A hydrophilic building block that is used as a binder in pressure-sensitive adhesives.

• Acts as a dispersing agent.
• It is an amine-based on a statistical polyethylene/polypropylene glycol copolymer.
• Exhibits high primary amine value, low viscosity, moderate reactivity, narrow molecular weight distribution, and hydrophilic monoamine.
• Ensures low content of by-products, improved handling & flow, and increased water compatibility.
• Enables to reach high-quality standards.
• Shows chemical reactions like salt formation with inorganic and organic acids, reaction with mono and di-functional isocyanates to form urea or polyurea derivatives, with mono- and di-functional carboxylic acids, anhydrides or esters to form diamides or polyamides, epoxides to form amino alcohols and with aldehydes & ketones to form imines.
• Insoluble in water but soluble in polar organic solvents.
• Genamin® M 41/2000 is listed in AICS, DSL, REACH, ENCS, IECSC, KECI, NECI, NZloC, PICCS and TSCA.

GENOMER 5161 by Rahn is oligoamine. Improves cure speed and surface cure.

• Exhibits good adhesion and excellent compatibility.
• Possesses low viscosity and high amine number.
• GENOMER 5161 complies with the following regulations: REACH, TSCA, ECL, and CLP Hazard.

GENOMER 5275 by Rahn is an oligoamine. It has fast surface cure rate, good adhesion, low odor and good adhesion and is low Tg flexibilizer. GENOMER 5275 complies with following regulations: TSCA, IECSC, METI, ECL and CLP Hazard.

Tri-N-Butylamine by Eastman is a clear liquid which is insoluble in water and very soluble in alcohol and ether. It is recommended for adhesives & sealants - b&c.

GENOMER 5142 by Rahn is an oligoamine. It has low viscosity, high amine number, good adhesion, excellent compatibility. Improves cure speed and surface cure. GENOMER 5142 complies with following regulations: REACH, TSCA, IECSC, ECL and CLP Hazard.

Jeffamine® THF-100 Polyetheramine by Huntsman is diamine based on a PTMEG (poly(tetramethylene ether glycol)/PPG (polypropylene glycol) copolymer.

• It is useful in a variety of polymers, including cured epoxy resins, polyurea and polyamides.
• It has also been used to improve flexibility and low temperature properties of polyamides.
• It has amine groups that are adjacent to methyl groups, which moderates their reactivity somewhat.
• Provides improved mechanical properties and improved anticorrosion property.
• Jeffamine® THF-100 Polyetheramine is effective in flexibilizing and promoting adhesive peel strength in epoxy formulations.
• It is listed in TSCA and ENCS.

Jeffamine® THF-170 Polyetheramine by Huntsman is diamine of approximately 1700 molecular weight. It is chemically based on a PTMEG [poly(tetramethylene ether glycol)]/PPG (polypropylene glycol) copolymer. It contains a significant amount of secondary amine as well as primary amine. It is useful in a variety of polymers including cured epoxy resins, polyurea and polyamides. It is effective in flexibilizing and promoting adhesive peel strength in epoxy formulations. It has also been used to improve flexibility and low temperature properties of polyamides. Jeffamine® THF-170 Polyetheramine provides improved mechanical properties, improved anticorrosion property and its amine end group is more reactive than alcohol. It is listed in TSCA.

Jeffamine® M-1000 Amine by Huntsman is polyetheramine. Used to modify epoxy resins for water reducible systems. Acts as an ore flotation agent and agricultural emulsifier.

Jeffamine® D-4000 Amine by Huntsman is polyetheramine. It is characterized by repeating oxypropylene units in the backbone. It is a difunctional and primary amine with average molecular weight of about 4000. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chains. Its benefits include relatively low viscosity, color and vapor pressure, improved flexibility from high molecular weight polyether backbone and increase peel strength. Jeffamine® D-4000 Amine is used in adhesives. It is listed in TSCA, DSL, AICS, ECL and IECSC.

BONTAMINE 5430 is a modified amine by TrueTime Industrial Corporation. It offers fast curing and heat resistance. Possible applications include adhesives for plastics, copper clad laminates, metal, satellites, bicycle frames, glass, ceramics, wood, airplanes, golf heads and marble. Recommended dosage level for BONTAMINE 5430 is 20 phr.