Amines

Priamine™ 1075 by Cargill is a low viscosity, high purity dimer diamine building block. It is designed for use in high molecular weight polyamides and high-performance polyimides in adhesives and sealants. It offers hydrophobicity, good wetting, flexibility and low melt viscosity.

• It allows the product to deform and prevents from cracking & shrinkage.
• It provides formulators freedom to adjust the melting point, allowing for higher temperature exposure of the end product without compromise on performance.
• It gives durability with longer lifetime and allows for exposure to humid conditions and can reduce density for weight saving.
• It also provides improved adhesion, sealing & protective properties and dimensional & color stability at varied humidity.
• It has 100% renewable carbon content.
• It also offers lubricity, flow, self-healing and full recovery from cutting, breaking or scratching at room temperature.
• Priamine™ 1075 is recommended for applications requiring high molecular weight (Mw) polymers with strict difunctionality and low color.
• It is ISCC certified grade.

Priamine™ 1073 by Cargill is a low viscous, bio-based dimer diamine building block. It is designed for use in polyamide hot melts, polyurea and epoxy adhesives & sealants. It can also be used as curing additive and offers reduced brittleness, enhanced moisture protection and flow. It provides formulation freedom in the choice of diacids used.

• It displays good hydrophobicity, excellent sealant properties, good substrate protection, good wetting and improved adhesion to various substrates.
• It has 100% renewable carbon content.
• It also provides flexibility to adjust the melting point allowing for higher temperature exposure of the end product without compromise on performance.
• Priamine™ 1073 is ISCC PLUS certified.

Priamine™ 1074 by Cargill is a low viscous, bio-based dimer diamine building block. It offers high flexibility even in low temperatures, hydrophobicity, hydrolytic stability and moisture repellency. It creates formulation freedom in the choice of diacids when modified.

• It gives formulators the flexibility to adjust the melting point allowing for higher temperature exposure of the end product without compromise on performance.
• It also offers improved substrate protection, good wetting and hence adhesion to plastic and various substrates.
• It has 100% renewable carbon content.
• It allows product to deform under stress and prevents from cracking.
• Designed for use in polyamide polymeric systems.
• Priamine™ 1074 is used in adhesives and sealants.
• It is ISCC PLUS certified.

Cardolite® NX-5454 is phenalkamine epoxy curing agent by Cardolite that has faster cure at low temperature, i.e. 0°C. Utilized as a solvent-free hardener for epoxy adhesives and as a co-curing agent or accelerator for slower cure epoxy systems. It provides excellent adhesion on wet or otherwise unprepared surfaces and green concrete. Cardolite® NX-5454 offers excellent water resistance, thus, provide outstanding water proofing layer and outstanding durability under high temperature and high humidity exposure. It is recommended for 2k epoxy adhesives in industrial and construction applications.

Cardolite® NC-558 is a low viscosity, solvent and benzyl alcohol free phenalkamine Epoxy curing agent. It has excellent rapid cure properties, even at low temperatures, offers very good chemical resistance, and provides excellent adhesion on wet or otherwise unprepared surfaces and green concrete. Cardolite® NC-558 offers excellent water resistance, thus, provide outstanding water proofing layer. Its fast cure and good hardness makes it ideal for applications requiring fast return to service. It is recommended for 2k epoxy adhesives as an epoxy hardener in industrial, construction, and offered for potable water adhesives.

Cardolite® NX-8401 by Cardolite is a water-borne epoxy curing emulsion that has low viscosity and longer pot life. It has demonstrated outstanding adhesion to concretes and metals, excellent hydrophobicity to improve durability of materials. This novel waterborne curing agent is easily compatible with epoxy dispersions and enable low and zero VOC water washable epoxy tile grouts, industrial and construction adhesives. Cardolite® NX-8401 is suitable for structural adhesives, concrete and joint cement/grouting.

EPIKURE™ Curing Agent 3010 by Westlake Epoxy is a curing agent based on amidoamine. It has low viscosity, low imidazoline content and dark color. It is based on tall oil fatty acid and polyamines. It is moderately fast-setting and provides excellent epoxy resin compatibility.

• It exhibits non-critical mix ratios, increased filler loading and average pot life.
• EPIKURE™ Curing Agent 3010 is used in metal and plastics adhesive.
• It has a shelf life of 3 years.

Cardolite® NC-557 is a low viscosity, solvent and benzyl alcohol free phenalkamine epoxy curing agent. It has excellent fast cure properties, even at low temperatures, offers very good chemical resistance, and provides excellent adhesion on wet or otherwise unprepared surfaces and green concrete. Cardolite® NC-557 is recommended for 2k epoxy adhesives in industrial, construction and can also be used in potable water applications.

Cardolite® NC-541 is a solvent-free phenalkamine epoxy curing agent with very high bio-content. It has excellent rapid cure properties, even at low temperatures with long pot life, and provides good adhesion on wet or otherwise unprepared surfaces. Cardolite® NC-541 can also be used in potable water applications, applications requiring FDA 175.300 compliance, and industrial adhesives.

EPIKURE™ Curing Agent 580 by Westlake Epoxy is a light color, lower viscosity, curing agent. This modified cycloaliphatic amine offers enhanced yellowing resistance, tack-free surfaces and excellent mechanical properties. It improves sustainability because it does not contain intentionally added benzyl alcohol or nonylphenol. It has less than 10 ppm free BPA content.

• It can improve hardness development and early water spot resistance at 10°C.
• In combination with liquid epoxy resins, EPIKURE™ Curing Agent 580 formulates ambient cure compositions of adhesives.
• Recommended mixing ratio with EPON™ Resin 828 (2 to 1 by volume) is 44 phr.
• It has a shelf life of 2 years.