Return to supplier page
MIKROFINE® ADC-SE by HPL Additives has One pack for the leather cloth, ideal in chemically embossed foams. MIKROFINE® ADC-FC1 by HPL Additives is Nonexplosive version of ADC-F2. MIKROFINE® ADC-VR by HPL Additives is for Sn stabilised rigid PVC pipes/profiles and sheets. MIKROFINE® SSS-I-II-III by HPL Additives is used for cellular rubber products. MIKROFINE® ADC-3838 by HPL Additives is an azodicarbonamid that acts as a blowing agent. It does not generate steam on decomposition thereby limiting mold corrosion. It is self-nucleating and produces foams with fine uniform cell structure and smooth surfaces. It is specially designed for injection molding and expansion of foamed thermoplastics. Recommended for polyethelenic and styrenic polymers with processing temperature around 210-230°C. MIKROFINE® ADC-3838 is suitable for wood replacement for electrical equipment, housing and automotive components, cross-linked injection molded EVA tyres, telephone & coaxial cables and extruded pipes. The recommended dosage rate is 0.4 - 1.0 PHR depending upon the polymer used and the extent of expansion required. MIKROFINE® 5A06 by HPL Additives acts as a blowing agent. It offers good dispersion behaviour. Specially designed for EVA compounds. Recommended for sandals and sleepers. Suitable for injection molding and extrusion. It makes products ideal for metering in hopper blender units on extruders and injection molding machines. MIKROFINE® OBSH WET by HPL Additives is sulfonyl hydrazide based blowing agent. It shows excellent compatibility with EPDM, PVC and micro cellular rubbers. MIKROFINE® OBSH WET is recommended for use in non-dusty version of coaxial cables, profiles and footwear. MIKROFINE® ADC-130 by HPL Additives is a blowing agent based on a modified azodicarbonamide. Suitable for low temperature plastisol applications. MIKROFINE® ADC-130 is used in carpet back foams. Azodicarbonamide. Acts as a blowing agent. It offers good dispersion behaviour. Specially designed for EVA compounds. Recommended for sandals and sleepers. Suitable for injection molding and extrusion. It makes products ideal for metering in hopper blender units on extruders and injection molding machines. For thicker artificial leathercloth (4mm and more).
MIKROFINE®
Polymer additives supplied by HPL Additives