Supplier Page

HECOPLAST

Overview Products66 Brands1 Products families13 News1

HECO® (Polymer additives)

Supplied by HECOPLAST

66 Products match your search

HECO® SLIP 114 PP

by HECOPLAST

HECO® SLIP 114 PP by HECOPLAST is an external slip and anti-blocking agent. It migrates to the surface slowly and forms a durable oleaginous layer with good slip and anti-blocking properties. <ul style="padding-left: 40px;"><li>It reduces friction and adhesion of the mixture during the mixing process.</li> <li>It is suitable for processing polypropylene in injection molding and extrusion.</li> <li>It is added in the range of 1.5-4.0% depending on the desired properties.</li> <li>HECO® SLIP 114 PP is approved by EU (VO) No. 10/2011 and US FDA.</li> <li>It has shelf life of 12 months.</li></ul>

Sustainable option
Support available
Original documents

See the product

HECO® SLIP 103 PO

by HECOPLAST

HECO® SLIP 103 PO by HECOPLAST is a slip, demolding and antistatic additive. It reduces the viscosity, increases the flow ability of the polymer melt and enhances the mold release properties. <ul style="padding-left: 40px;"><li>It migrates to the surface of the plastic during and after the production, which provides an anti-static effect.</li> <li>It is suitable for processing various polymers such as polyolefins, polyamides, polyesters, polycarbonates and polyvinylchloride in injection molding and extrusion.</li> <li>Recommended dosage level is 0.3-1.5% depending on the desired properties.</li> <li>It complies with EU (VO) No. 10/2011 and US-FDA.</li> <li>HECO® SLIP 103 PO has a shelf life of 12 months.</li></ul>

Sustainable option
Support available
Original documents

See the product

HECO® SLIP 140 PO

by HECOPLAST

HECO® SLIP 140 PO by HECOPLAST acts primarily as an internal slip agent. It is also used as demolding additive in non-polar plastics and lubricant by reducing the shear forces that occur. <ul style="padding-left: 40px;"><li>It migrates to the surface of the molded part and reduces adhesion to metal parts in plastics. </li> <li>It is suitable for processing various polymers such as polyolefins, PP, PA, PS, polyester and POM in injection molding and extrusion. </li> <li>Its recommended dosage is added in the range of 0.2–1.0% depending on the desired properties. </li> <li>Due to its high melting point, it is also suitable for applications where a certain temperature is to be expected. </li> <li>It complies with EU (VO) No. 10/2011 and US-FDA. </li> <li>HECO® SLIP 140 PO has a shelf life of 12 months.</li></ul>

Sustainable option
Support available
Original documents

See the product

HECO® FOAM 970 PO

by HECOPLAST

HECO® FOAM 970 PO by HECOPLAST is a chemical, endothermic blowing and nucleating agent. It is suitable for thermoplastic polymers, including polyethylene and polypropylene in injection molding. <ul style="padding-left: 40px;"><li>Recommended dosage level is 0.5-2.0% depending on the desired properties. </li> <li>It complies with EU (regulation) No. 10/2011 and US-FDA. </li> <li>HECO® FOAM 970 PO has a shelf life of 12 months.</li></ul>

Sustainable option
Support available
Original documents

See the product

HECO® SLIP 161 PP

by HECOPLAST

HECO® SLIP 161 PP by HECOPLAST is an external slip and anti-blocking agent. It reduces friction and adhesion of the mixture during the mixing process. It is suitable for processing polypropylene in injection molding and extrusion. <ul style="padding-left: 40px;"><li> It migrates to the surface slowly and forms a durable oleaginous layer with good slip and anti-blocking properties.</li> <li>The recommended dosage level is 4.0-20.0% depending on the desired properties.</li> <li>It complies with EU (VO) No. 10/2011, European pharmacopoeia 11th edition 2023 and US-FDA.</li> <li>HECO® SLIP 161 PP has a shelf life of 12 months.</li></ul>

Sustainable option
Support available
Original documents

See the product

HECO® NOX 650 CYC

by HECOPLAST

HECO® NOX 650 CYC by HECOPLAST acts as an antioxidant. It protects against thermal aging that can lead to discoloration or even loss of usability. It is a long-term thermo-stabilizer for recycling applications. <ul style="padding-left: 40px;"><li>It is suitable for processing polyolefin and polyethylene in injection molding and extrusion. </li> <li>This is particularly important for processes that use recycled materials in a closed-loop system. </li> <li>It specifically slows down undesirable oxidative decomposition processes. </li> <li>Recommended dosage level is 1.0-4.0% depending on the desired properties. </li> <li>HECO® NOX 650 CYC has a shelf life of 12 months.</li></ul>

Support available
Original documents

See the product

HECO® FOAM 910 BIO

by HECOPLAST

HECO® FOAM 910 BIO by HECOPLAST is a chemical, endothermic blowing and nucleating agent. It is suitable for biopolymers such as polylactic acid (PLA) and polybutylene succinate (PBS) in injection molding, extrusion and direct gassing. <ul style="padding-left: 40px;"><li>Recommended dosage level is 1.0-2.0% for extrusion (weight reduction), 0.3-0.5% for injection molded parts to avoid sink marks, 0.2-1.2% for cell regulation and nucleation and 1.0-2.5% for weight reduction.</li> <li>HECO® FOAM 910 BIO has a shelf life of 12 months.</li>

Support available
Original documents

See the product

HECO® ELAST 705 PO

by HECOPLAST

HECO® ELAST 705 PO by HECOPLAST is an impact modifier. It has polyolefin plastomer an active agent. It significantly improves the elasticity and flexibility. <ul style="padding-left: 40px;"><li>It enhances the flow properties and transparency of polyolefins.</li> <li>It is suitable for processing of polyethylene and polypropylene in injection molding, extrusion and extrusion blow molding.</li> <li>The recommended dosage level is 5.0-25.0 % depending on the desired properties.</li> <li>HECO® ELAST 705 PO complies with EU (regulation) No. 10/2011 and US FDA.</li> <li>It has shelf life of 12 months.</li></ul>

Sustainable option
Support available
Original documents

See the product

HECO® STAB 372 PP

by HECOPLAST

HECO® STAB 372 PP by HECOPLAST is a light stabilizer masterbatch. It is suitable for polypropylene articles under extreme climatic conditions. <ul style="padding-left: 40px;"><li>It is based on a sterically hindered amine, which prevents radical polymer degradation initiated by UV light. </li> <li>It protects the plastic to be processed from UV light exposure. </li> <li>The recommended dosage level is 1.0-10.0%. </li> <li>HECO® STAB 372 PP has a shelf life of 12 months.</li></ul>

Support available
Original documents

See the product

HECO® FOAM 980 PO

by HECOPLAST

HECO® FOAM 980 PO by HECOPLAST is a chemical, endothermic blowing and nucleating agent. It is suitable for thermoplastic polymers like polyamide in injection molding. Recommended dosage level is 0.2-1.0% for sink mark reduction and 1.0-3.0% for weight reduction. HECO® FOAM 980 PO has a shelf life of 12 months.

Support available
Original documents

See the product

Showper page

Most Popular Brands

HECO®

by HECOPLAST

66 products

See All Products