Return to supplier page
ANCAMINE® T by Evonik is a crosslinking agent based on N-(2-hydroxy ethyl)diethylene triamine. Acts as an ambient or elevated temperature curing agent for use with liquid epoxy resins. Possesses light color, low viscosity, high reactivity and reduced skin irritation compared with unmodified aliphatic amines. ANCAMINE® T is used in electrical potting and encapsulation. ANCAMINE® K54 by Evonik is a crosslinker based on 2,4,6-tris (dimethylaminomethyl) phenol. It is an efficient tertiary amine activator for epoxy resins cured with a wide variety of hardener types including polysulphides, polymercaptans, aliphatic & cycloaliphatic amines, polyamides, amidoamines, dicyandiamide and anhydrides. ANCAMINE® K54 by Evonik is used in casting and laminate applications. ANCAMINE® DETA by Evonik is 98.5% minimum purity grade of diethylenetriamine-based unmodified curing agent in encapsulation. It has a strong tendency for carbanation. It is used in the modification of aliphatic amine curing agents. The shelf life of the product is 24 months. ANCAMINE® TEPA by Evonik acts as a crosslinking agent. It is a standard commercial grade of tetraethylene pentamine. It is less corrosive and has a lower vapor pressure and is also less hygroscopic & less prone to carbamation. ANCAMINE® TEPA exhibits extended pot life and less tendency to blush compared with other unmodified aliphatic amines. ANCAMINE® 2049 by Evonik is a curing agent based on unmodified cycloaliphatic amine used to cure epoxy resins at elevated temperatures.<br>
<ul style="padding-left: 40px;"><li>It is designed for use in large composite structural parts where longer pot life is required.</li>
<li>It is suitable for processing by resin infusion, filament winding, wet lay-up laminates, resin transfer molding and prepreg.</li>
<li>It offers low viscosity, a longer pot at moderate temperatures and excellent mechanical properties following elevated temperature cure.</li>
<li>It is used in structural composites like larger pipes & composite fittings, wind blades and tanks as well as casting and tooling.</li>
<li>ANCAMINE® 2049 has a shelf life of 24 months. Recommended usage level is 32 phr.</li></ul> ANCAMINE® 2450 by Evonik is a cycloaliphatic amine crosslinker. Used in filament winding, wet lay-up laminating and potting compounds. Offers higher glass transition temperature. Possesses low viscosity and good toughness. ANCAMINE® 2014AS by Evonik is a modified polyamine curing agent. Used in composites and small potting applications. Offers long pot life. Provides rapid cure above their temperature of activation and good adhesion. ANCAMINE® DL50 by Evonik is a curing agent. It is a liquid mixture of aromatic amines based on methylenedianiline. It is recommended for laminating and filament winding, composite and pre-preg fabrication and casting & tooling. It offers increased crosslink density of a completely cured epoxy compared with methylenedianiline. ANCAMINE® DL50 aromatic, multifunctional curative is used to produce high-strength, chemically resistant, elevated temperature-tolerant epoxy parts. It provides excellent resistance to water, acid, alkalies and hydrocarbon solvents. Recommended shelf life is 60 months. ANCAMINE® 1922A by Evonik is a low viscosity, moderately reactive room temperature curing agent. Used in electrical potting and encapsulation. Imparts very good thermal shock resistance. Provides toughness and resiliency. Possesses good electrical properties and very low vapor pressure. ANCAMINE® 2264 by Evonik is epoxy curing agent. It exhibits some of the beneficial properties of both cycloaliphatic and aromatic amines. It is an ideal alternative to aromatic diamines in the elevated temperature cure of epoxy resins. It is suitable for filament winding, resin transfer molding and wet lay-up laminates processing. It offers excellent mechanical properties following elevated temperature cure. It shows good resistance against acids, alkali, water and hydrocarbon solvents when heat cured. It provides increased chemical resistance and faster cure. ANCAMINE® 2264 finds application in high-temperature pipes & fittings, wind blades and tanks. It has a shelf life of 24 months. Recommended dosage level is 30 phr.
ANCAMINE®
Polymer additives supplied by Evonik