Return to supplier page
Dynamar™ FX 5920A by 3M is a free-flowing, fluoropolymer processing aid. It improves extrusion processing of polyolefin resins and reduces or eliminates melt fracture. It reduces or eliminates die build-up and lowers apparent melt viscosity.<br>
<ul style="padding-left: 40px;"><li>This additive is ideal for use in polyolefin resins containing silica based antiblocking agents, titanium dioxide-based pigments and other inorganic additives.</li>
<li>It exhibits exceptional commercial utility in low melt index film LLPDE and HDPE.</li>
<li>This additive offers performance and cost advantages.</li>
<li>It is used in low-density polyethylene (LDPE), ethylene-vinyl acetate (EVA) and other polyolefin resins.</li>
<li>It produces films and other articles of improved strength and quality.</li><li>It reduces or eliminates melt fracture and can reduce extruder torque.</li><li>It allows for an increase in output and produce films with enhanced and balanced bi-directional physical properties and improved clarity and gloss.</li><li>The typical usage level is 400-1000 ppm.</li>
<li>It is FDA approved.</li>
<li>Dynamar™ FX 5920A has a shelf life of 2 years.</li></ul> Dynamar™ FX 5911 by 3M is fluoropolymer-based processing aid. It improves extrusion processing of polyolefins and other thermoplastic resins, and can offer performance and cost benefits in a wide range of polymers. It is particularly useful at low levels in reducing extruder die build-up. This additive shows excellent thermal stability for high temperature processing. It is ideal for use in high viscosity, high molecular weight polyolefins. Dynamar™ FX 5911 lowers apparent melt viscosity and speeds colorant change. Also, reduces or eliminates melt fracture and can reduce extruder torque. It is used in LLDPE, LDPE, HDPE and PP. It is suitable for film, pipe and blow molding processes. This product allows for longer defect-free run times and improved gauge uniformity in cast film, BOPP processes and reduced fiber breakage in monofilament and fiber processes. Recommended for bottles, pipes and other HMW-HDPE articles with improved surface finish and quality. The typical usage level is 200-1000 ppm. It is FDA approved. The shelf life of this product is 2 years. Dynamar™ FX 9613 by 3M is a free flowing fluoropolymer. Acts as a processing aid. Offers very good thermal stability for high temperature processing. Reduces or eliminates the melt fracture and die build-up. Lowers apparent melt viscosity. Can offer performance and cost advantages. Broadens the extrusion processing capabilities of polyolefin resins. May also allow an increase in output and yield films with enhanced as well as balanced bi-directional physical properties. Also exhibits improved clarity and gloss. Dynamar™ FX 9613 is an ideal for use in low melt index LLDPE and high molecular weight HDPE resins. Dynamar™ FX 5166 by 3M is fluorocarbon elastomer. Used as cure accelerator in polyepichlorohydrin elastomers. Used to adhere incorporated cure Dyneon™ fluoroelastomers and Dyneon™ THV fluorothermoplastics without the use of an external bonding agent for veneer fuel hose constructions and to adhere nitrile rubber compounds. Dynamar™ FX 5166 provides excellent scorch resistance, significant rheological flexibility, good heat aging and compression set resistance. Dynamar™ FX 5912 by 3M is a free-flowing fluoropolymer. Acts as a polymer processing aid. Has very good thermal stability. Reduces/eliminates the die build-up. Lowers apparent melt viscosity. Broadens the extrusion processing capabilities of certain types of polyolefin resins. Can offer performance and cost advantages. Is designed for use at very low levels to improve the processing of thermoplastics. Dynamar™ FX 5912 is used in extrusion processing of wire and cable, fiber spinning and certain calendering operations. Dynamar™ RC 5251Q by 3M is sodium carbonate cure activator and acid receptor for ECO compounds. It is used as part of a cure system for vulcanizing polyepichlorohydrin elastomers. This additive provides excellent scorch resistance, significant rheological flexibility, good heat aging and good compression set resistance. Dynamar™ RC 5251Q is used in veneer fuel and filler hose constructions. Recommended for rubber and plastic industry. Dynamar™ FX 5920B by 3M is a free-flowing fluropolymer. Acts as a processing aid. Reduces or eliminates the melt fracture as well as die build-up. Lowers the apparent melt viscosity and permits fabricators to use high strength resins which otherwise could not be processsed on available equipment. Broadens extrusion processing capabilities of polyolefin resins. Can offer performance and cost advantages. Through optimization of the extrusion process, the use of FX 5920B may also allow an increase in output and yield films with enhanced as well as balanced bi-directional physical properties. Dynamar™ FX 5920B also exhibits improved clarity and gloss. Designed for x-ray fluorescence analytical test methods. Ideal for use in polyolefin resins containing antiblocking agents, pigments and other inorganic additives. Dynamar™ FX 9614 by 3M is a free-flowing fluoropolymer. Acts as a polymer processing aid. Reduces or eliminates the melt fracture as well as die build-up. Lowers the apparent melt viscosity. Provides very good thermal stability for high temperature processing. Can offer performance and cost advantages. Broadens the extrusion processing capabilities of polyolefin resins. Dynamar™ FX 9614 is an ideal for use in low melt index LLDPE and high molecular weight HDPE resins. Dynamar™ PPA FX 5922 by 3M is free-flowing fluoropolymer. It is used as polymer processing aid in LLDPE, HDPE, EVA and other polyolefins for blow molding, film blowing and film casting by extrusion.<br>
<ul style="padding-left: 40px;"><li>It is especially effective in polyolefin resins containing talc and silica based antiblocking agents, titanium dioxide based pigments, and other inorganic additives.</li>
<li>Designed for use at low levels to improve processing and not affect good physical properties of high strength polymers.</li>
<li>It reduces or eliminates die build-up and melt fracture.</li>
<li>Dynamar™ PPA FX 5922 speeds colorant changes, lowers apparent melt viscosity and reduces gel formation.</li></ul> Dynamar™ HC 1101 by 3M has demonstrated benefits in specialized extrusion and calendaring processes. It is useful at reducing die pressure, reducing die build-up, and promoting release from calendaring rolls.<br>
<ul style="padding-left: 40px;"><li>It exhibits melt fracture elimination, die build-up reduction, gel reduction, improved pigment dispersion.</li>
<li>This epoxy curative is a linear polyether di-primary amine which contains tetramethylene oxide as the principal recurring unit and has a molecular weight of approximately 10,000.</li>
<li>It has high tensile strength, elongation and hydrolytic stability.</li>
<li>It has adhesion properties like epoxy resins and excellent abrasion resistance.</li>
<li>It offers high resilience and low heat build-up during dynamic use.</li>
<li>Dynamar™ HC 1101 has a wide range of available hardness.</li></li>
Dynamar™
Polymer additives supplied by 3M