Technical datasheet
Filler Black Masterbatch 6003
Supplied byAnda Masterbatch- Last Updated on Jan 21, 2025
Filler Black Masterbatch 6003 by Anda Masterbatch is a composition of low carbon black content and high calcium carbonate filler with recycled PE and EVA as carrier resins. It is designed for use in injection molding, extrusion, compounding and blowing film. It is suitable for direct addition and mixing with plastic resins in a mixer while processing to avoid pollution and mal-scattering problems that are caused by pigments. It is compatible with polymers such as LDPE, HDPE and LLDPE. It offers reduced cost. The dosage level of Filler Black Masterbatch 6003 is 4-20%.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Color | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
No data available
Conversion mode
For which polymer
Availability
Product Status:Visible After Login
Filler Black Masterbatch 6003 properties
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Carbon Black Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Moisture Content | 0.0 Visible After Login | Visible After Login | Visible After Login |