Matting / Glossing Agents for Plastic Compounds

WARADUR® OP distributed by DKSH is an ester wax consisting of esters of montanic acids with multihydroxyl alcohols. It acts as a nucleating-, release agent, flow improver, dispersing agent for color masterbatches and filled plastics (talc, glass fiber), gloss booster, surface improver.

• It is made from a fossil biological source.
• The corresponding esters in WARADUR® OP exhibit chain length in the range of C58-C66 and provide this wax with a low volatility, good thermostability and low migration rates.
• It is compatible with thermoplastics such as PA, PBT, TPE, PC, PVC, styrenics, thermosets such as epoxy resins, phenolic resins and polyurethane.
• The maximum shelf life is 5 years.
• It is available in Malaysia.

Fine-Blend® XGM-001 distributed by DKSH is a general epoxy organic matting agent and its appearance is white powder. It can provide excellent matt solutions for PC/ABS, PC/ASA, PA/ABS, PBT/ABS.

• It significantly reduces the gloss of material without sacrificing other properties of the material.
• Fine-Blend® XGM-001 is available in Europe, North America and Asia Pacific.

PALMOWAX Oleyl Palmitamide (OPA) by KLK OLEO acts as a slip agent, dispersant, external lubricant, flow improver, internal lubricant, matting agent, processing aid, surface finish improver and anti-blocking agent. It offers excellent surface migration and dispersion properties, while its addition to asphalt enhances viscoelasticity and raises the softening point which is ideal for road construction. It also enhances thermal stability and processing efficiency in complex systems. It has several polymer applications including ABS (acrylonitrile butadiene styrene), acetal, nylon/polyamide, PBT (polybutylene terephthalate), PC (polycarbonate), PE (polyethylene), PET (polyethylene terephthalate), PMMA (polymethyl methacrylate), PU (polyurethane), PVC (polyvinyl chloride), rubber, SBC (styrene block copolymer), thermoplastic polyester, wood plastic composite (WPC).

WARADUR® E by Voelpker is an ester wax consisting of esters of montanic acids with multihydroxyl alcohols. It acts as a release agent, flow improver, dispersing agent for color masterbatches and filled plastics (talc, glass fiber), gloss booster, surface improver.

• It is made from a fossil biological source.
• The corresponding esters in WARADUR® E exhibit chain length in the range of C58-C66 and provide this wax with a low volatility, good thermostability and low migration rates.
• It is compatible with thermoplastics such as PA, PBT, TPE, PC, PVC, styrenics, thermosets such as epoxy resins, phenolic resins and polyurethane.
• The maximum shelf life is 5 years.
• It has reached the criteria for inherent biodegradability (OECD Guideline 301 D, Closed Bottle Test).

ALTUGLAS® BS 130 by Trinseois a methylmethacrylate (MMA) copolymer compatible with PVC and all vinylic polymers. It acts as a matting agent.

• It possesses homogeneous effects, excellent reproducibility of recipes and minimal effect on mechanical properties such as impact strength, modulus, strain and even intrinsic weatherability (UV resistance) of beads.
• It provides excellent dispersion in polymers during melting and processing.
• It exhibits surface effects, anti-blocking and printability characteristics.
• It has high stability temperature (typical of PMMA >300°C) and therefore it is not degraded at all by usual processing conditions (shear and temperature) of PVC.
• Shows little effect on processing conditions like torque, pressure, melting temperature.
• It is used in the manufacturing of extruded opaque sheets in furnitures and thermoformable door panels, packaging, extruded profiles in sidings and window boards.
• Can be used in a broad range of formulations of flexible and rigid PVC with any type of additive including plasticizers, processing aids, fillers, pigments and stabilizers. Provides frost appearance in bottles.
• It is also used in making blown films to give transparent and opaque effects.

ALTUGLAS® BS 100 by Trinseo is a methylmethacrylate (MMA) copolymer. Acts as a matting agent. It exhibits surface effects, anti-blocking and printability characteristics. Shows perfect compatibility with PVC and all vinylic polymers. Provides excellent dispersion in polymers during melting and processing.

• Possesses homogeneous effects, excellent reproducibility of recipes and minimal effect on mechanical properties such as impact strength, modulus, strain and even intrinsic weatherability (UV resistance) of beads.
• Shows little effect on processing conditions like torque, pressure, melting temperature etc.
• It has high stability temperature (typical of PMMA >300°C) and therefore it is not degraded at all by usual processing conditions (shear and temperature) of PVC.
• It can be used in a broad range of formulations of flexible and rigid PVC with any type of additive including plasticizers, processing aids, fillers, pigments and stabilizers.
• Provides frost appearance in bottles.
• Used in the manufacturing of extruded opaque sheets in furniture and thermoformable door panels, packaging, extruded profiles in sidings and window boards.
• ALTUGLAS® BS 100 is also used in making blown films to give transparent and opaque effects.

SYLYSIA SY740 by FUJI SILYSIA is a micronized synthetic amorphous silica-gel. It is an excellent agent for matting and anti-blocking polymer film. Low pore volume product with a small pore diameter, giving superior quality as a water scavenger.

SYLYSIA SY390 by FUJI SILYSIA is a micronized synthetic amorphous silica-gel. It is highly versatile and can be used in plastics. It acts as a rheology modifier and imparts strength. It is an effective agent for matting and anti-blocking polymer film.

SYLYSIA SY310P by FUJI SILYSIA is a micronized synthetic amorphous silica-gel. This grade is highly versatile and can be used in plastics. It is an excellent agent for matting and anti-blocking polymer film. It acts as a rheology modifier and strengthening agent.

SYLYSIA SY470 by FUJI SILYSIA is a micronized synthetic amorphous silica-gel. It is highly versatile and can be used in plastics. It acts as an anti-blocking agent for polymer film. SYLYSIA SY470 is also an effective matting agent. Lower pore volume makes easier dispersion and lower impact on viscosity.