Impact Modifiers for Plastic Compounds

DeltaMax® f500 by Milliken is an all-purpose modifier designed for use in injection molding applications. It offers improved impact properties while maintaining stiffness and increased melt flow to improve processing.

• It is suitable for polypropylene (PP) impact copolymers and recycled polypropylene (rPP) resins.
• DeltaMax® f500 offers additional benefit of being colorless.
• It can be added machine side at the feed throat or hopper between 0.5% - 1.5%.
• The shelf life of the product is 12 months when stored below 40°C.

Fine-Blend® CMG5805-L distributed by DKSH is an impact modifier for low temperature PA. It is a maleic anhydride grafted polymer. The base polymer is a polyolefin elastomer with high flexibility and it has white or light-yellow particle appearance.

• It improves impact property, low temperature resistance and reduce water absorption of nylon.
• It can be processed over a wide range of conditions.
• The typical processing temperature range is from 150°C to 280°C.
• It can develop a reliable bonding strength between PA/PP or PA/PE alloys.
• Recommended for use in super toughened, glass fiber reinforced nylon, flame retardant nylon and low temperature resistant nylon.
• It is also used for compatibilizer in non-halogen flame retardant polyolefin-based wire and cable compounds.
• Fine-Blend® CMG5805-L is available in Europe, North America and Asia Pacific.

Blendex® 587S by DKSH is a polymer heat modifier that is suitable with PVC, CPVC, ABS and SAN. It is an alphamethlystyrene containing a high level of AMS. It is excellent choice for embossing retention during thermoforming.

• It increases the service temperature of products produced from PVC homopolymer and copolymers.
• It improves vicat & heat distortion temperature and also increases tensile & flexural properties.
• It can be used with a Blendex impact modifier to provide impact strength as well as high heat performance.
• It provides dimensional stability to PVC parts.
• Blendex® 587S is used in appliance and business machine housings, electrical and telecommunication devices.
• It is available in Europe.

NYRIM® Additive 6 Plus by Brüggemann is a processing aid and impact modifier in the anionic polymerization of caprolactam along with the catalyst BRUGGOLEN® C10 and activator BRUGGOLEN® C20P (pellet form) or BRUGGOLEN® C235 (liquid form). It improves toughness and yield in machining semi-finished products. It can increase the low temperature impact strength of cast polyamide by the formation of a copolymeric structure. The anionic polymerization of caprolactam is inhibited by the smallest amounts of moisture therefore the process requires moisture-free raw materials and moisture proof conditions. It is recommended for large, low-tension semi-finished products such as bars, tubes and plates, to complex, often thick-walled molded parts that cannot be manufactured through injection molding or extrusion. NYRIM® Additive 6 Plus can also be used in rough and tough applications. The dosage level can vary from 2-20%. The shelf life of the product is at least 12 months under (dry, 25°C) conditions.

DeltaMax® 5000a by Millikenis a performance modifier that helps to improve the melt flow rate (MFR) and impact strength for heterophasic polypropylene impact copolymers. It is used in conjunction with organic peroxide to enable controlled rheology modification. Recommended dosage level of DeltaMax® 5000a is 0.05% to 0.4% and peroxide is 0.01% to 0.1%. It has a shelf life of 12 months.

DeltaMax® i300 by Milliken is a high-performance impact enhancer. It is designed for use in injection molding application of polypropylene impact copolymers and in recycled polypropylene resins. It maximizes impact performance while optimizing melt flow rate (MFR) for improved physical properties and processability of polypropylene. Recommended dosage level of DeltaMax® i300 is 0.5% to 1.0%. It has a shelf life of 12 months.

BRUGGOLEN® C540 by Brüggemann is an impact modifier for AP-NYLON® casting for the catalyst side. This viscous elastomer provides prolonged open time, toughness and a highly cost effective system for moldings. It works as a soft polymer segment in the polyamide 6. The dosage level of BRUGGOLEN® C540 is 1.5-25%. It has a shelf life of at least 24 months.

BRUGGOLEN® TP-C1312 by Brüggemann acts as an impact modifier for AP-NYLON® casting. It creates the bridge between unmodified cast polyamide and highly impact-resistant NYRIM® PA6 block copolymers, in terms of cost and performance. Used for the production of AP-NYLON® products containing 3 to 20% of elastomer. It is based on an elastomeric polyetherpolyol and chemically bonded to an activator. It is incorporated as a soft polymer segment into the polyamide 6 during the anionic polymerization. It offers impact strength and toughness. BRUGGOLEN® TP-C1312 ranges from 3 to 15%, for very low E-moduli higher dosage levels of up to 40% are possible. The shelf life of the product is 12 months (unopened, dry, 25°C) conditions.

Durastrength® 4000 by Arkema is a multifunctional, acrylic-based impact modifier. It imparts excellent impact properties to rigid PVC products and offers outstanding processability. It offers faster fusion than alternative non-acrylic impact modifiers without the need for additional processing aids.

• It exhibits great impact resistance, and low melt viscosity.
• It provides good stability, smooth processing and high output rates in vinyl formulations.
• It offers sustainable performance with a reduced carbon footprint of up to 35% compared to traditional acrylic additives.
• It uses patented technology to reduce the ratio of fossil materials and lowers energy consumption in production processes.
• It can be used in place of CPE impact modifiers while maintaining the processing advantages of traditional acrylic impact modifiers.
• Substrate applications utilizing Durastrength® 4000 maintain important mechanical properties for final PVC product performance.
• It is recommended for rigid siding, ribbed pipe, fence and deck substrate.

Clearstrength® XT100 by Arkema is a high performance toughening agent designed for thermosetting resins. It is methylmethacrylate-butadiene-styrene (MBS) core-shell optomized for (meth)acrylics, epoxies, and polyesters.

• It has low viscosity and excellent processability at low temperatures, enabling energy savings and broad compatibility with a wide range of monomers.
• It is easily dispersible in most liquid resin systems at very low shear rates and exhibits a limited impact on their viscosity.
• It yields superior toughness and shear adhesion strength in high Tg epoxy (Tg>200°C) than standard MBS powder.
• Clearstrength® XT100 can be advantageously used to replace standard core/shell modifier powders but also liquid masterbatches of pre-dispersed core/shell particles.