Anti-slip Agents for Plastic Compounds

IP1211 by Ingenia is an antistatic and slip masterbatch. It is a proprietary compound of high purity glycerol monostearate (GMS) and erucamide in an LLDPE carrier resin. It is used as an internal additive to control surface resistivity on the surface of the film over an extended period of time, effectively reducing static cling and minimizing dust accumulation.

• The slip agent in the formulation causes a reduction in coefficient of friction occurs slowly after extrusion and lasts for a considerable length of time, as the erucamide will slowly but continuously migrate to the surface to replace the amount lost from the surface.
• It is designed for blown and cast film, LDPE, LLDPE and HDPE film applications.
• It does not require dispersion aids, waxes or stearates.
• IP1211 may be used to meet the requirements of Title 21 of the U.S. Federal Code of Regulations and CONEG.

Hubercarb® M3PT by Huber Engineered Materials is a fine ground calcium carbonate-based filler. It acts as an extender, gloss control agent, anti-slip additive, rheology modifier and densifier.

• Produced from a uniform, high calcium limestone deposit in marble falls, Texas.
• Its particles are processed with a proprietary fatty acid-based surface treatment.
• Hubercarb® M3PT is recommended for pipes, conduit and PVC compound applications.

Hubercarb® Q40-200 by Huber Engineered Materials is a granular calcium carbonate-based filler with carefully controlled particle distribution. It acts as an extender, gloss control agent, anti-slip additive, rheology modifier, texturizer and densifier.

• Produced at huber’s quincy, Illinois plant which is known for its natural uniformity.
• Possess consistent purity and brightness.
• It is suitable for oilfield drilling fluids where its low acid insoluble content is useful.
• Hubercarb® Q40-200 is recommended for plaster, EIFS, abrasives and PVC flooring applications.

Hubercarb® Q2PT by Huber Engineered Materials is a fine ground calcium carbonate-based filler. It acts as an extender, gloss control agent, anti-slip additive, rheology modifier and densifier.

• Produced at huber’s quincy, Illinois plant which is known for its natural uniformity.
• Possess consistent purity and brightness.
• Its particles are processed with a proprietary fatty acid based surface treatment.
• Hubercarb® Q2PT is recommended for pipes, conduit, PVC compounds, plastics and polyolefin masterbatches.

Hubercarb® G8 by Huber Engineered Materials is a fine ground calcium carbonate-based filler with high purity. It acts as an extender, gloss control agent, anti-slip additive, rheology modifier and densifier.

• Produced from a high brightness marble deposit in Georgia.
• Exhibits carefully controlled particle distribution and offers high brightness or pure tints.
• Hubercarb® G8 is recommended for PVC compounds and plastic applications.

Hubercarb® Q200T by Huber Engineered Materials is a fine ground calcium carbonate-based filler. It acts as an extender, gloss control agent, anti-slip additive, rheology modifier and densifier.

• Produced at huber’s quincy, Illinois plant which is known for its natural uniformity.
• Possess consistent purity and brightness.
• Its particles are processed with a proprietary fatty acid based surface treatment.
• Hubercarb® Q200T is suitable for use in PVC flooring, rubber and plastic applications.

Hubercarb® M200 by Huber Engineered Materials is a medium fine ground calcium carbonate-based filler. It acts as an extender, gloss control agent, anti-slip additive, rheology modifier and densifier.

• Produced from a uniform, high calcium limestone deposit in marble falls, Texas.
• Hubercarb® M200 is suitable for wide range of applications such as carpet backing to cleansers and joint compounds to PVC flooring where its low acid insoluble content is useful.

Antiskid masterbatch with LLDPE as carrier polymer. Used for general film applications and specialty multilayer film. It is approved for use in contact with foodstuffs according to FDA.

VENLOWAX EBS by Syntheo is a white solid wax and dispersing agent. It acts as a release and anti-static agent. It is widely used as a form release agent. It is derived from the reaction of ethylenediamine and stearic acid. It provides a slippery coating with low toxicity. It enhances processability, decrease friction and contribute color stability.

• It is used in automotive, construction, building, electronics, electrical and packaging.
• VENLOWAX EBS has a shelf life of 6 months.

Hubercarb® W3NT by Huber Engineered Materials is a unique ground calcium carbonate-based filler with fine particle distribution. It acts as an extender, gloss control agent, anti-slip additive, rheology modifier and densifier. It has high surface area, round particle shape, and its low silica content are enhanced by processing with a proprietary fatty acid based surface treatment. Applications include compression molded plastics, PVC pipe, rubber and plastics.