Home
>
Polymer additives
>
Guide
>
A Practical Guide to Polymeric Compatibilizers for Polymer Blends, Composites and Laminates

A Practical Guide to Polymeric Compatibilizers for Polymer Blends, Composites and Laminates

Last update on Dec 14, 2005

Jozef Bicerano, Ph.D.

Introduction

Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After Login Visible After LoginVisible After Login

Unlock for free

Fundamental Considerations

Unlock for free

Performance Versus Price

Unlock for free

Thermodynamic Equilibrium Phase Diagram

Unlock for free

Metastable Morphologies Induced by Processing Conditions

Unlock for free

Practical Implications of Kinetic Barriers to Equilibration

Unlock for free

Morphology-Property Connections

Unlock for free

Overview of Available Compatibilization Technologies

Unlock for free

Representative Examples of Vendors and Their Technologies

Unlock for free

BASF

Unlock for free

Degussa

Unlock for free

Dexco Polymers

Unlock for free

Dow Chemical Company

Unlock for free

DuPont

Unlock for free

Kraton Polymers

Unlock for free

Kuraray

Unlock for free

Polymer Chemistry Innovations Inc.

Unlock for free

Struktol

Unlock for free

Technology Outlook

Unlock for free

References

Unlock for free

References

1.W. J. Work, K. Horie, M. Hess and R. F. T. Stepto, "Definitions of Terms Related to Polymer Blends, Composites, and Multiphase Polymeric Materials", Pure Appl. Chem., 76, 1985-2007 (2004).
2.L. A. Utracki and T. V. Khanh, "Filled Polymers", Chapter 7 in Multicomponent Polymer Systems, edited by I. S. Miles and S. Rostami, Longman Scientific & Technical, Essex, England (1992), 207-268.
3.J. Bicerano, Prediction of Polymer Properties, revised and expanded third edition, Marcel Dekker, New York (2002).
4.A.-V. Ruzette and L. Leibler, "Block Copolymers in Tomorrow's Plastics", Nature Materials, 4, 19-31 (2005).
5.L. Leibler, "Emulsifying Effects of Block Copolymers in Incompatible Polymer Blends", Makromol. Chem., Macromol. Symp., 16, 1-17 [1988].
6.R. Israels, D. Jasnow, A. C. Balazs, L. Guo, G. Krausch, J. Sokolov and M. Rafailovich, "Compatibilizing A/B Blends With AB Diblock Copolymers: Effect of Copolymer Molecular Weight", J. Chem. Phys., 102, 8149-8157 [1995].
7.Y. Lyatskaya, D. Gersappe, N. A. Gross and A. C. Balazs, "Designing Compatibilizers to Reduce Interfacial Tension in Polymer Blends", J. Phys. Chem., 100, 1449-1458 [1996].
8.G. H. Fredrickson and S. T. Milner, "Time-Dependent Reactive Coupling at Polymer-Polymer Interfaces", Macromolecules, 29, 7386-7390 [1996].
9.G. H. Fredrickson, "Diffusion-Controlled Reactions at Polymer-Polymer Interfaces", Phys. Rev. Lett., 76, 3440-3443 [1996].
10.B. O'Shaughnessy and U. Sawhney, "Polymer Reaction Kinetics at Interfaces", Phys. Rev. Lett., 76, 3444-3447 [1996].
11.B. O'Shaughnessy and D. Vavylonis, "Interfacial Reactions: Mixed Order Kinetics and Segregation Effects", Phys. Rev. Lett., 84, 3193-3196 [2000].
12.S.-P. Lyu, J. J. Cernohous, F. S. Bates and C. W. Macosko, "Interfacial Reaction Induced Roughening in Polymer Blends", Macromolecules, 32, 106-110 [1999].
13.M. Y. Gelfer, H. H. Song, L. Liu, B. S. Hsiao, B. Chu, M. Rafailovich, M. Si and V. Zaitsev, "Effects of Organoclays on Morphology and Thermal and Rheological Properties of Polystyrene and Poly(methyl methacrylate) Blends", J. Polym. Sci., Polym. Phys. Ed., 41, 44-54 [2003].
14.Y. S. Lipatov, "Polymer Blends and Interpenetrating Polymer Networks at the Interface With Solids", Progress in Polymer Science, 27, 1721-1801 [2002].
15.Y. S. Lipatov, A. E. Nesterov, T. D. Ignatova and D. A. Nesterov, "Effect of Polymer-Filler Surface Interactions on the Phase Separation in Polymer Blends", Polymer, 43, 875-880 [2002].
16.Y. S. Lipatov, L. V. Kosyanchuk, A. E. Nesterov and O. Antonenko, "Filler Effect on Polymerization Kinetics and Phase Separation in Polymer Blends Formed In Situ", Polymer International, 52, 664-669 [2003].
17.J. Bicerano, S. Balijepalli, A. Doufas, V. Ginzburg, J. Moore, M. Somasi, S. Somasi, J. Storer and T. Verbrugge, "Polymer Modeling at The Dow Chemical Company", J. Macromol. Sci. - Polymer Reviews, 44, 53-85, 2004.
18.P. M. Subramanian, "Permeability Barriers by Controlled Morphology of Polymer Blends", Polym. Eng. Sci., 25, 483-487 (1985).
19.L. Chen, S.-C. Wong, T. Liu, X. Lu and C. He, "Deformation Mechanisms of Nanoclay-Reinforced Maleic Anhydride-Modified Polypropylene", J. Polym. Sci., Polym. Phys. Ed., 42, 2759-2768 (2004).