Return to supplier page
TEDUR® L 9510-1 U by MOCOM Compounds is a polyphenylene sulphide reinforced with 40% glass fiber. Exhibits high stiffness. It is suitable for processing by injection molding. Recommended for pump components. TEDUR® L 9300-1 by MOCOM Compounds is a polyphenylene sulphide (PPS) reinforced with 40% glass fiber and glass beads. Exhibits high toughness, reduced flash, increased burst strength and low warpage. It can be processed using injection molding. Complies with UL 94 V-0 flame rating. TEDUR® L 9400-3.2 by MOCOM Compounds is a polyphenylene sulphide (PPS) reinforced with 30% carbon fiber. Exhibits reduced surface resistivity, electrical conductivity and high stiffness. It can be processed using injection molding. Recommended for functional components in automotive, machinery, electrical and electronic applications. TEDUR® L 9400-3.2 complies with UL 94 V-0 flame rating. TEDUR® L 9113-2 by MOCOM Compounds is a polyphenylene sulphide reinforced with 60% glass fiber. Exhibits high stiffness. It can be processed using injection molding. Recommended for automotive and machinery applications. TEDUR® L 9410-1 by MOCOM Compounds is a polyphenylene sulphide (PPS) reinforced with 45% glass fiber/ mineral and 15% PTFE. Exhibits high stiffness, low warpage and improved sliding & wear properties. Can be processed using injection molding. Recommended for automotive and machinery applications including bearings, sliding elements and functional components. TEDUR® L 9410-1 complies with UL 94 V-0 flame rating. TEDUR® L 9413-1 by MOCOM Compounds is a high stiffness polyphenylene sulphide (PPS) reinforced with 15% carbon fiber, 15% PTFE and 4% silicone. Exhibits electrical conductivity, scratch resistance and improved sliding and wear properties. It can be processed using injection molding. Recommended for automotive and machinery applications including bearings, sliding elements and functional components. TEDUR® L 9413-1 complies with UL 94 V-0 flame rating. TEDUR® L 9107-7 by MOCOM Compounds is a polyphenylene sulphide (PPS) reinforced with 40% glass fiber. Exhibits high toughness, reduced flash, increased burst strength and low odor. It can be processed using injection molding. Recommended for automotive and machinery applications such as pump components, housings, pump impellers, high pressure vessels. TEDUR® L 9107-7 complies with UL 94 V-0 flame rating. TEDUR® L 9510-1 S by MOCOM Compounds is a high stiffness polyphenylene sulphide (PPS) reinforced with 40% glass fiber. It can be processed using injection molding. Recommended for machinery applications such as pump components. Complies with UL 94 V-0 flame rating. TEDUR® L 9510-5 by MOCOM Compounds is a polyphenylene sulphide (PPS) reinforced with 40% glass fiber. Exhibits high stiffness and easy flow. Can be processed using injection molding. Recommended for pump components and housings. Complies with UL 94 V-0 flame rating. TEDUR® L 9912-1 by MOCOM Compounds is a high density polyphenylene sulphide (PPS) reinforced with 60% glass fiber and mineral. It can be processed using injection molding. Recommended for automotive and machinery applications. It complies with UL 94 V-0 flame rating.
TEDUR®
Plastics and elastomers supplied by MOCOM Compounds