Return to supplier page
Stanyl® TW241F10 by Envalior is a high-performance, lubricated, heat-stabilized polyamide (PA 4-6) grade reinforced with 50% glass fiber. It provides high mechanical properties, strength, design stiffness, wear & friction and process flow qualities. It is a high-heat polyamide that offers excellent creep-, heat-, chemical- and fatigue resistance especially at high temperatures in combination with cycle-time advantages and excellent flow. It is suitable for processing by injection molding. It has an excellent track record in gear applications and structural parts. Stanyl® TW241F10 is used in automotive, electrical & electronics, outdoor power equipment, charge air cooler caps, EPS steering components (gears, flex couplers and sensors), end-laminates (electrical components), MTF/DMF- & torque convertor components, wheel speed sensors, off-road vehicle oil pans and reservoirs. Stanyl® HGR1 by Envalior is a high-performance, heat-stabilized polyamide (PA 4-6) grade. It provides high mechanical properties, superior heat- & chemical resistance, design stiffness, wear & friction and process flow qualities. It is suitable for processing by injection molding. Stanyl® HGR1 is used for applications in automotive, gears, electrical & electronics and outdoor power equipment. Stanyl® TE200F6-FC by Envalior is a food contact quality, high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, heat- & chemical resistance, design stiffness, wear & friction and process flow qualities. It is suitable for processing by injection molding. Stanyl® TE200F6-FC is recommended for use in kitchen appliance gears, dishwasher proof, pipe fittings, spatulas and kitchenware. Stanyl® TE250F8 by Envalior is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 40% glass fiber. It provides high mechanical properties, heat- & chemical resistance, design stiffness, wear & friction and process flow qualities. It is suitable for processing by injection molding. It allows for reliable solutions due to good creep resistance and good electrical properties. It offers cost-efficient solutions due to high toughness levels resulting in low reject levels in winding process and due to excellent flowability enabling thin wall designs. Stanyl® TE250F8 is used in automotive, gears, electrical & electronics, outdoor power equipment, bobbins, terminal blocks, DDR DIMM-, reflow- and battery connectors. Stanyl® TE251F7 by Envalior is a flame retardant polyamide 4-6 (nylon 4-6) resin reinforced with 33% glass fiber. It exhibits good chemical resistance. It is suitable for processing by injection molding. Stanyl® TE251F7 is used in electrical and electronics applications. Stanyl® ECO280F10 by Envalior is a bio-based polyamide (PA) resin reinforced with 50% glass fiber. It is suitable for processing by injection molding. Stanyl® TW363 by Envalior is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow & toughness, cycle-time advantages, retains its mechanical properties at high temperatures up to 220°C, stiffness and excellent wear & friction property. It imparts chemical- and excellent heat resistance. It is an impact-modified high-heat polyamide that offers excellent strength, creep- & fatigue resistance. Stanyl® TW363 is used in automotive, electrical & electronics, outdoor power equipment, convoluted tubes and front-end accessory drive parts (belt tensioner, damping bands, shoes and bushings). Stanyl® TS271A1 by Envalior is a high-performance, aramid-reinforced, wear- & friction-modified high-heat polyamide that offers extremely low abrasion for gear & bushing applications. It provides high mechanical properties, heat- & chemical resistance, design stiffness and process flow qualities. It is suitable for processing by injection molding. Stanyl® TS271A1 is used in automotive, electrical & electronics and outdoor power equipment. Stanyl® TW350 by Envalior is a high-performance, flame-retardant, heat-stabilized polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow, design stiffness, wear & friction and process flow qualities. It retains its mechanical properties at high temperatures up to 220°C. It imparts chemical- and excellent heat resistance. Stanyl® TW350 is used in automotive, electrical & electronics, outdoor power equipment and gears. Stanyl® HFX82S by Envalior is a high-performance, halogen- & red phosphorous-free, flame-retarded polyamide (PA 4-6) grade reinforced with 45% glass fiber. It provides high mechanical properties and an excellent combination of high CTI, flow & weld-line strength. It offers superior heat- & chemical resistance, design stiffness, wear & friction and process flow qualities. It is suitable for processing by injection molding. Stanyl® HFX82S is used for applications in automotive, gears, electrical & electronics and outdoor power equipment. It is also applicable in desktops, DR DIMM- and USB-C connectors.
314 products 174 products 132 products 95 products
Stanyl®
Plastics and elastomers supplied by Envalior
Stanyl® is a series of high-performance aliphatic polyamide (PA4-6) materials by Envalior which deliver high-performance in demanding applications (from cooking utensils used in hot boiling oil to challenging automotive applications) and often outperform other high-heat polymers.
Key benefits of Stanyl® brand include:
- High crystallinity and fast crystallization speeds
- High melting temperature
- Excellent mechanics, wear, friction behavior, and superior flow
95 Products match your search
Stanyl® TW241F10
by Envalior
- Support available
- Original documents
Stanyl® HGR1
by Envalior
- Support available
- Original documents
Stanyl® TE200F6-FC
by Envalior
- Support available
- Original documents
Stanyl® TE250F8
by Envalior
- Support available
- Original documents
Stanyl® TE251F7
by Envalior
- Support available
- Original documents
Stanyl® ECO280F10
by Envalior
- Sustainable option
- Support available
- Original documents
Stanyl® TW363
by Envalior
- Support available
- Original documents
Stanyl® TS271A1
by Envalior
- Support available
- Original documents
Stanyl® TW350
by Envalior
- Support available
- Original documents
Stanyl® HFX82S
by Envalior
- Support available
- Original documents
Durethan®
by Envalior
Akulon®
by Envalior
Pocan®
by Envalior