Return to supplier page
Stanyl® TE250F6 by Envalior is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design stiffness, wear & friction and process flow qualities. It is an electro-friendly high-heat polyamide that offers excellent creep-, heat-, chemical- and fatigue resistance especially at high temperatures in combination with cycle-time advantages and excellent flow. It is suitable for processing by injection molding. Stanyl® TE250F6 is used in automotive, gears, brush-holder (electrical components & motors), miniature- & molded case circuit-breaker, coil insulators, appliances, electrical & electronics and outdoor power equipment. It is also applicable in e-motor bobbins, end-laminates (electrical components & motors), firefighter helmets, hair curler brushes, thermostatic controls, motor starter/overload relays, automotive-, FPC-, reflow-, WtB-, BtB and battery connectors. Stanyl® 46HF4550 by Envalior is a high-performance, heat stabilized polyamide 4-6 (PA 4-6) grade reinforced with 50% glass fiber for electronics & electrical applications. It is suitable for processing by injection molding. It provides unmatched performance, high flowability, superior heat- & chemical resistance, design stiffness, wear & friction and process flow qualities. It retains its mechanical properties at high temperatures up to 220°. It is used in reflow connectors. Possible applications include automotive, gears and outdoor power equipment. Stanyl® TW241F6 by Envalior is a high-performance, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design stiffness, wear & friction and process flow qualities. It is a high-heat polyamide that offers excellent creep-, heat-, chemical- and fatigue resistance especially at high temperatures in combination with cycle-time advantages and excellent flow. It is processed by injection molding. Stanyl® TW241F6 is used in automotive bearing cages, wheel speed sensors, gears, end-laminates (electrical components), electronics and outdoor power equipment. Stanyl® TS272A1 by Envalior is a high-performance, aramid-reinforced, wear- & friction-modified high-heat polyamide that offers extremely low abrasion for gear & bushing applications. It provides high mechanical properties, heat- & chemical resistance, design stiffness and process flow qualities. It is suitable for processing by injection molding. Stanyl® TS272A1 is used in automotive, electrical & electronics, outdoor power equipment, belt tensioner, damping bands, bushings and shoes. Stanyl® TW341-J by Envalior is a high-performance, lubricated, heat-stabilized polyamide (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow, design stiffness, wear & friction and process flow qualities. It retains its mechanical properties at high temperatures up to 220°C. It imparts chemical- and excellent heat resistance. Stanyl® TW341-J is used in automotive, electrical & electronics, outdoor power equipment and gears. Stanyl® TW371 by Envalior is a high-performance, unfilled, heat-stabilized polyamide 4-6 (PA 4-6) grade. It is suitable for processing by injection molding. It possesses high flow & toughness, cycle-time advantages, retains its mechanical properties at high temperatures up to 220°C, friction and stiffness. It imparts chemical- and excellent heat resistance. It is a friction-modified high-heat polyamide that offers excellent strength, creep- & fatigue resistance. Stanyl® TW371 is used in automotive, gears, electrical & electronics, outdoor power equipment, MTF/DMF components, new generation slide shoe surfaces, shifter fork wear pad and front end accessory drive parts (belt tensioner, damping bands, shoes and bushings). Stanyl® HGR3-W (P1120D) by Envalior is a heat-stabilized, wear and friction-modified, high-performance polyamide 46 grade. It is a bio-based, mass-balanced grade with good chemical resistance. Designed for automotive OEM under-the-hood applications. Stanyl® HGR3-W (P1120D) is suitable for processing by extrusion and injection molding. Stanyl® TW200F6 by Envalior is a high-performance, heat-stabilized, polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design stiffness, wear & friction and process flow qualities. It is a high-heat polyamide that offers excellent creep-, heat-, chemical- and fatigue resistance, especially at high temperatures in combination with cycle-time advantages and excellent flow. It is processed by injection molding. Stanyl® TW200F6 is used in end-laminates (electro motors), fuse holders, charge air cooler caps, hot charge air ducts, electrical & electronics, speed-, position- & temperature sensors, torque convertor- & MTF/DMF components and outdoor power equipment. It is also applicable in lawnmower muffler components, lawnmower trimmer mufflers, coil insulation, DRL sockets, E-boxes, E-motor electric insulation, brush-holders (electrical components and electro motors), automotive bearing cages, suspension system top mounts, connectors and e-motor bobbins. Stanyl® HGR1 by Envalior is a high-performance, heat-stabilized polyamide (PA 4-6) grade. It provides high mechanical properties, superior heat- & chemical resistance, design stiffness, wear & friction and process flow qualities. It is suitable for processing by injection molding. Stanyl® HGR1 is used for applications in automotive, gears, electrical & electronics and outdoor power equipment. Stanyl® HGR2 BK00001 by Envalior is a high-performance, non-reinforced, heat-stabilized polyamide (PA 4-6) grade. It provides high mechanical properties, superior heat- & chemical resistance, abrasion resistance and design stiffness and process flow qualities. It is a friction-modified high heat grade designed for friction-reduction in valve timing-chain systems that offers excellent wear & friction properties in combination with low friction. It allows for cost-effective solutions due to faster cycle times. It is suitable for processing by injection molding. Its possible applications include automotive, gears, electrical & electronics and outdoor power equipment. Stanyl® HGR2 BK00001 is also applicable in slide shoe surfaces and timing chain tensioner surfaces.
314 products 174 products 131 products 95 products
Stanyl®
Plastics and elastomers supplied by Envalior
Stanyl® is a series of high-performance aliphatic polyamide (PA4-6) materials by Envalior which deliver high-performance in demanding applications (from cooking utensils used in hot boiling oil to challenging automotive applications) and often outperform other high-heat polymers.
Key benefits of Stanyl® brand include:
- High crystallinity and fast crystallization speeds
- High melting temperature
- Excellent mechanics, wear, friction behavior, and superior flow
95 Products match your search
Stanyl® TE250F6
by Envalior
- Support available
- Original documents
Stanyl® 46HF4550
by Envalior
- Support available
- Original documents
Stanyl® TW241F6
by Envalior
- Support available
- Original documents
Stanyl® TS272A1
by Envalior
- Support available
- Original documents
Stanyl® TW341-J
by Envalior
- Support available
- Original documents
Stanyl® TW371
by Envalior
- Support available
- Original documents
Stanyl® HGR3-W (P1120D)
by Envalior
- Sustainable option
- Support available
- Original documents
Stanyl® TW200F6
by Envalior
- Support available
- Original documents
Stanyl® HGR1
by Envalior
- Support available
- Original documents
Stanyl® HGR2 BK00001
by Envalior
- Support available
- Original documents
Durethan®
by Envalior
Akulon®
by Envalior
Pocan®
by Envalior