Return to supplier page
Stanyl® TS200F6 B-MB by Envalior is a high-performance, bio-based polyamide 4-6 (PA 4-6) reinforced with 30% glass fiber. It provides superior heat resistance, design stiffness, wear & friction and process flow qualities. It is suitable for processing by injection molding. Stanyl® TS200F6 B-MB is recommended for use in automotive, electrical & electronics, gears and outdoor power equipments. Stanyl® TE200F6-FC by Envalior is a food contact quality, high-performance, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, heat- & chemical resistance, design stiffness, wear & friction and process flow qualities. It is suitable for processing by injection molding. Stanyl® TE200F6-FC is recommended for use in kitchen appliance gears, dishwasher proof, pipe fittings, spatulas and kitchenware. Stanyl® TE250F6 by Envalior is a high-performance, flame-retardant, heat-stabilized polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design stiffness, wear & friction and process flow qualities. It is an electro-friendly high-heat polyamide that offers excellent creep-, heat-, chemical- and fatigue resistance especially at high temperatures in combination with cycle-time advantages and excellent flow. It is suitable for processing by injection molding. Stanyl® TE250F6 is used in automotive, gears, brush-holder (electrical components & motors), miniature- & molded case circuit-breaker, coil insulators, appliances, electrical & electronics and outdoor power equipment. It is also applicable in e-motor bobbins, end-laminates (electrical components & motors), firefighter helmets, hair curler brushes, thermostatic controls, motor starter/overload relays, automotive-, FPC-, reflow-, WtB-, BtB and battery connectors. Stanyl® TW241F10 by Envalior is a high-performance, lubricated, heat-stabilized polyamide (PA 4-6) grade reinforced with 50% glass fiber. It provides high mechanical properties, strength, design stiffness, wear & friction and process flow qualities. It is a high-heat polyamide that offers excellent creep-, heat-, chemical- and fatigue resistance especially at high temperatures in combination with cycle-time advantages and excellent flow. It is suitable for processing by injection molding. It has an excellent track record in gear applications and structural parts. Stanyl® TW241F10 is used in automotive, electrical & electronics, outdoor power equipment, charge air cooler caps, EPS steering components (gears, flex couplers and sensors), end-laminates (electrical components), MTF/DMF- & torque convertor components, wheel speed sensors, off-road vehicle oil pans and reservoirs. Stanyl® TW241F6 by Envalior is a high-performance, heat-stabilized and lubricated polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design stiffness, wear & friction and process flow qualities. It is a high-heat polyamide that offers excellent creep-, heat-, chemical- and fatigue resistance especially at high temperatures in combination with cycle-time advantages and excellent flow. It is processed by injection molding. Stanyl® TW241F6 is used in automotive bearing cages, wheel speed sensors, gears, end-laminates (electrical components), electronics and outdoor power equipment. Stanyl® 46HF4130 by Envalior is a heat-stabilized polyamide 4-6 (PA 4-6) grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It possesses high flow & toughness, low friction, reduced cycle time, easy processability, excellent retention of stiffness at higher temperatures (above 100°C). Stanyl® 46HF4130 provides chemical resistance, excellent heat-, wear-, abrasion-, grease- and oil resistance. It allows for lightweight, cost-effective solutions enabling thin-walled, complex designs. It is used in aircraft engine panels and jet engine parts. It meets ISO 1043 for PA46 regulations. Stanyl® TW271F6 by Envalior is a high-performance, heat-stabilized polyamide 4-6 (PA 4-6) and PTFE grade reinforced with 30% glass fiber. It is suitable for processing by injection molding. It possesses high flow & toughness, cycle-time advantages, wear & friction modified and stiffness. It imparts chemical- and excellent heat resistance. It retains its mechanical properties at high temperatures up to 220°C. It is a high heat polyamide that offers excellent strength, creep- & fatigue resistance. Stanyl® TW271F6 has an excellent track record in gear (self-propelled lawnmower transmission, oil pumps, transmission control, crankshaft balance & EPS steering components) applications. It is used in automotive, CRB housing, rod guides, MTF/DMF components, electrical & electronics and outdoor power equipment. It is also applicable in EPS steering components (flex couplers and sensors), power door-, power liftgate-, power window- and windshield wiper actuators. Stanyl® TW200F6 by Envalior is a high-performance, heat-stabilized, polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design stiffness, wear & friction and process flow qualities. It is a high-heat polyamide that offers excellent creep-, heat-, chemical- and fatigue resistance, especially at high temperatures in combination with cycle-time advantages and excellent flow. It is processed by injection molding. Stanyl® TW200F6 is used in end-laminates (electro motors), fuse holders, charge air cooler caps, hot charge air ducts, electrical & electronics, speed-, position- & temperature sensors, torque convertor- & MTF/DMF components and outdoor power equipment. It is also applicable in lawnmower muffler components, lawnmower trimmer mufflers, coil insulation, DRL sockets, E-boxes, E-motor electric insulation, brush-holders (electrical components and electro motors), automotive bearing cages, suspension system top mounts, connectors and e-motor bobbins. Stanyl® TS272A1 by Envalior is a high-performance, aramid-reinforced, wear- & friction-modified high-heat polyamide that offers extremely low abrasion for gear & bushing applications. It provides high mechanical properties, heat- & chemical resistance, design stiffness and process flow qualities. It is suitable for processing by injection molding. Stanyl® TS272A1 is used in automotive, electrical & electronics, outdoor power equipment, belt tensioner, damping bands, bushings and shoes. Stanyl® TE210F2 by Envalior is a heat-stabilized, polyamide 4-6 (PA 4-6) reinforced with 10% glass fiber. This flame retarded grade is processed by injection molding. It offers superior heat resistance, design stiffness, wear & friction and process flow qualities.
314 products 174 products 131 products 95 products
Stanyl®
Plastics and elastomers supplied by Envalior
Stanyl® is a series of high-performance aliphatic polyamide (PA4-6) materials by Envalior which deliver high-performance in demanding applications (from cooking utensils used in hot boiling oil to challenging automotive applications) and often outperform other high-heat polymers.
Key benefits of Stanyl® brand include:
- High crystallinity and fast crystallization speeds
- High melting temperature
- Excellent mechanics, wear, friction behavior, and superior flow
95 Products match your search
Stanyl® TS200F6 B-MB
by Envalior
- Support available
- Original documents
Stanyl® TE200F6-FC
by Envalior
- Support available
- Original documents
Stanyl® TE250F6
by Envalior
- Support available
- Original documents
Stanyl® TW241F10
by Envalior
- Support available
- Original documents
Stanyl® TW241F6
by Envalior
- Support available
- Original documents
Stanyl® 46HF4130
by Envalior
- Support available
- Original documents
Stanyl® TW271F6
by Envalior
- Support available
- Original documents
Stanyl® TW200F6
by Envalior
- Support available
- Original documents
Stanyl® TS272A1
by Envalior
- Support available
- Original documents
Stanyl® TE210F2
by Envalior
- Support available
- Original documents
Durethan®
by Envalior
Akulon®
by Envalior
Pocan®
by Envalior