Return to supplier page
Novamid® 2620A by Envalior is polyamide 6 (PA 6) and polyamide 6T (PA 6T) grade. It is suitable for processing by extrusion. It is used in monofilaments. Novamid® ID 1030-CF10 by Envalior is a polyamide 6/66 grade filled with 10% carbon-fiber. It is 3D printable at same speed as unreinforced plastics. It creates parts that are stronger, tougher and stiffer with high tensile strength and modulus. It offers very low warpage compared to unfilled polyamide (PA). It produces structural parts with high dimensional stability and durable parts with good mechanical properties due to high inter-layer strength. It shows a characteristic matte black surface finish with less roughness. Novamid® ID 1030-CF10 is available in spools of 1.75 and 2.85 mm. Novamid® ID 1030 by Envalior is a strong, ductile and easy-to-print polyamide (PA 6/66) grade. Novamid® ID 1030 is suitable for processing by 3D printing using fused filament fabrication (FFF) equipment and extrusion. Possible applications include automotive and packaging industries. Novamid® 2430A3 (N-X158) by Envalior is a lubricated, polyamide 6-66 (nylon 6-66) monofilament grade. It offers improved processing, high viscosity and good chemical resistance. It is processed by extrusion. Novamid® 1007J by Envalior is a low viscosity, polyamide 6 grade. It is suitable for processing by injection molding and extrusion. Novamid® ES113J by Envalior is a high-quality, non-reinforced, non-flame retarded, chemically resistant, low viscosity polyamide (PA 6) grade. It is suitable for processing by injection molding and extrusion. Possible applications include automotive and packaging industries. Novamid® 1011CH5-KR by Envalior is a heat-stabilized, nucleated, lubricated, chemical resistant, polyamide (PA) 6 thermoplastic grade. It offers good and fast flow-ability, very easy mold release and flexibility. It is suitable for high-cycle injection molding production. Novamid® 1011CH5-KR is designed for the hinged or bending feature of the parts. Novamid® 1010CH1 by Envalior is a low viscosity, polyamide 6 grade. It is suitable for processing by injection molding. Novamid® 1013C4 by Envalior is a low viscosity, chemical resistant, polyamide 6 thermoplastic grade. It is suitable for processing by injection molding. Novamid® 1013C by Envalior is a heat stabilized, low viscosity, lubricated, polyamide 6 grade. Is suitable for processing by injection molding. Shows excellent flow, fast molding cycles, excellent surface appearance of molded part, superior impact strength, excellent abrasion resistance, high heat resistance, high density and self-extinguishing capabilities. Used in wide range of applications in automotive, electrical & electronics and consumer goods. Novamid® 1013C meets ISO 1043 for PA6.
314 products 174 products 131 products 95 products
Novamid®
Plastics and elastomers supplied by Envalior
Novamid® by Envalior are specialty PA6 and PA66 homopolymer, PA6/66 copolymer, and amorphous polyamide grades. These grades offer customizations to meet specific demands for mechanical, heat, processing, transparency and flexibility. They support a wide variety of processing techniques, from film extrusion, filament extrusion, and injection molding.
Key benefits of Novamid® brand include:
- Superior mechanical properties
- High heat resistance
- High chemical resistance, especially for oils and organic solvents
91 Products match your search
Novamid® 2620A
by Envalior
- Support available
- Original documents
Novamid® ID 1030-CF10
by Envalior
- Support available
- Original documents
Novamid® ID 1030
by Envalior
- Support available
- Original documents
Novamid® 2430A3 (N-X158)
by Envalior
- Support available
- Original documents
Novamid® 1007J
by Envalior
- Support available
- Original documents
Novamid® ES113J
by Envalior
- Support available
- Original documents
Novamid® 1011CH5-KR
by Envalior
- Support available
- Original documents
Novamid® 1010CH1
by Envalior
- Support available
- Original documents
Novamid® 1013C4
by Envalior
- Support available
- Original documents
Novamid® 1013C
by Envalior
- Support available
- Original documents
Durethan®
by Envalior
Akulon®
by Envalior
Pocan®
by Envalior