Return to supplier page
DotCore PP H50 00 GF1 by Benvic is a general purpose, chemically coupled, 50% glass fiber reinforced polypropylene (PP) homopolymer. It is suitable for processing by injection molding. DotCore PP H30 00 TR1 by Benvic is a general purpose, low flow polypropylene (PP) homopolymer reinforced with 30% mineral. It is suitable for processing by extrusion and injection molding. DotCore PP H30 00 GF1 V0 E by Benvic is a PBDE-free, general-purpose, chemically coupled polypropylene (PP) reinforced with 30% glass fiber. It offers excellent cost/performance ratio. It is suitable for processing by injection molding and extrusion. DotCore PP H30 00 GF1 V0 E complies with UL 94 V0 flame rating. DotCore PP H22 00 GFT1 by Benvic is a general purpose, chemically coupled polypropylene (PP) homopolymer reinforced with 10% glass fiber and 10% mineral. It is suitable for processing by injection molding. DotCore PP H30 92 GF3 HT by Benvic is a general purpose, chemically coupled polypropylene (PP) homopolymer reinforced with 30% glass fiber. Exhibits high flow and heat stability. It is suitable for processing by injection molding. DotCore PP TR/30 H-D-R by Benvic is a polypropylene (PP) homopolymer reinforced with 30% mineral. It exhibits heat-, detergent- and copper contact stability. It is suitable for processing by injection molding. It complies with UL 94 HB flame rating. DotCore PP C40 92 CC1 by Benvic is a general-purpose polypropylene (PP) copolymer reinforced with 40% calcium carbonate. It is suitable for processing by extrusion and injection molding. DotCore PP C40 92 CC1 exhibits low flow and offers excellent cost/performance ratio. DotCore PP C40 00 GF1 by Benvic is a 40% glass fiber reinforced, chemically coupled polypropylene (PP) copolymer with low flowability. It is suitable for processing by extrusion and injection molding. DotCore PP H45 00 TC1 by Benvic is a general purpose, low flow polypropylene (PP) homopolymer reinforced with 45% mineral. It is suitable for processing by extrusion and injection molding. DotCore PP 5220/V0-EP WOD by Benvic is a PBDE-free, general-purpose polypropylene (PP) copolymer reinforced with 20% mineral. It provides excellent cost/performance ratio. DotCore PP 5220/V0-EP WOD is suitable for processing by injection molding. It complies with UL 94 VO flame rating.
DotCore
Plastics and elastomers supplied by Benvic