Return to supplier page
Ultramid® BMB by BASF is a virgin-quality polyamide derived from renewable raw material. It reduces fossil resource consumption and product carbon footprint without compromising on quality and performance. Certified mass balance according to REDcert. Ultramid® H33 L by BASF is a thermoplastic polyamide (PI) with a high water permeability. It has high strength and hydrophilic properties that allows subsequent drying directly in the casing. Ultramid® H33 L is used in artificial casings in which sausages can be smoked and then dried. Ultramid® Ccycled® by BASF is a polyamide grade with a circular solution with an attributed share of pyrolysis oil originating from Asia-sourced post-consumer plastic waste. Through the mass balance approach, it offers the same identical high-performance properties as virgin fossil-based materials. Ultramid® Ccycled® is chemical recycling solution contributes to TE’s sustainable development. Ultramid® A3K by BASF is an unreinforced, easy flowing, polyamide 66 (PA66) grade. It displays fast processing properties. It is the material with the greatest hardness, rigidity, abrasion resistance and thermostability. It is processed by injection molding. Ultramid® A3K by BASF is suitable for electrical household appliances. It can also be used in terminal blocks, connectors, photovoltaics and automotive construction. Ultramid® A3EG6 by BASF is a polyamide 66 reinforced with 30% glass fiber. It possesses good elastic & dielectric properties, high dimensional stability, high creep strength and excellent sliding friction properties. This grade provides good toughness at low temperatures, hardness, high rigidity, high mechanical strength, stiffness, thermal stability, very good impact strength and good processability. It exhibits outstanding resistance to chemicals, hot lubricants and hot water, fuels, hydraulic fluids and coolants, refrigerants, dyes, paints, cleaners, degreasing agents, aliphatic and aromatic hydrocarbons and many other solvents. It is resistant to corrosion, to aqueous solutions of salts and alkalis and to stress-crack formation compared to many amorphous plastics. This grade is processed by injection molding. Ultramid® A3EG6 by BASF is suitable for machinery components and housings such as lamp socket housings, cooling fans, insulating profile for aluminum window frames, water containers for automotive cooling systems, as well as electrically insulating parts. Ultramid® A3WG6 by BASF is a polyamide 66 reinforced with 30% glass fiber. It provides good toughness at low temperatures, hardness, high rigidity, high mechanical strength, stiffness, thermal stability, very good impact strength and good processability. This grade exhibits outstanding resistance to chemicals, hot lubricants and hot water, fuels, hydraulic fluids and coolants, refrigerants, dyes, paints, cleaners, degreasing agents, aliphatic and aromatic hydrocarbons and many other solvents. It possesses good elastic properties, high dimensional stability, high creep strength and excellent sliding friction properties. It is resistant to heat aging, corrosion, to aqueous solutions of salts and alkalis and to stress-crack formation compared to many amorphous plastics. Ultramid® A3WG6 by BASF is processed by injection molding. It is used for machinery components and housings such as lamp socket housings, cooling fans, insulating profile for aluminum window frames, and different automotive powertrain parts. Ultramid® A3W by BASF is an unreinforced, easy flowing, polyamide 66 (PA66) grade. This grade is processed by injection molding. It displays fast processing properties. It is the material with the greatest hardness, rigidity, abrasion resistance and thermostability. Ultramid® A3W by BASF is suitable for highly stressed technical parts, such as bearings, gear wheels and electrically insulating parts such as terminals and cable connectors. Ultramid® A3HG7 by BASF is a polyamide 66 reinforced with 35% glass fiber. It provides good toughness at low temperatures, hardness, high rigidity, high mechanical strength, stiffness, thermal stability, very good impact strength and good processability. This grade exhibits outstanding resistance to chemicals, hot lubricants and hot water, fuels, hydraulic fluids and coolants, refrigerants, dyes, paints, cleaners, degreasing agents, aliphatic and aromatic hydrocarbons and many other solvents. It is resistant to corrosion, to aqueous solutions of salts and alkalis and to stress-crack formation compared to many amorphous plastics. It possesses good elastic & dielectric properties, high heat-aging resistance, high dimensional stability, high creep strength and excellent sliding friction properties. Ultramid® A3HG7 by BASF is processed by injection molding. It is used for gear-wheels, solenoid valve housings, cable attachments, automobile manifolds and cylinder head covers as well as for electrical insulating parts. Ultramid® A4H by BASF is a medium viscosity, unreinforced, polyamide 66 (PA 66) with high impact strength even at dry state. It possesses good elastic properties, high dimensional stability, high creep strength and excellent sliding friction properties. This grade provides good toughness at low temperatures, high rigidity, high mechanical strength, stiffness, thermal stability, very good impact strength and good processability. It exhibits outstanding resistance to chemicals, hot lubricants and hot water, fuels, hydraulic fluids and coolants, refrigerants, dyes, paints, cleaners, degreasing agents, aliphatic and aromatic hydrocarbons and many other solvents. It is resistant to high heat aging, corrosion, to aqueous solutions of salts and alkalis and to stress-crack formation compared to many amorphous plastics. It is processed by injection molding. Ultramid® A4H by BASF is suitable for highly stressed parts such as bearing cages, gear wheels, coil formers and cable connectors. It is compliant with EC Regulation 1907/2006 (REACH), RohS directive 2011/65/EC and WEEE directive 2002/96/EC. Ultramid® A3HG6 HR by BASF is a polyamide 66 reinforced with 30% glass fiber. It possesses good elastic properties, high dimensional stability, high creep strength and excellent sliding friction properties. This grade provides good toughness at low temperatures, hardness, high rigidity, high mechanical strength, stiffness, thermal stability, very good impact strength and good processability. This grade exhibits outstanding resistance to chemicals, hot lubricants & hot water, fuels, hydraulic fluids and coolants, refrigerants, dyes, paints, cleaners, degreasing agents, aliphatic and aromatic hydrocarbons and many other solvents. It is resistant to hydrolysis, corrosion, to aqueous solutions of salts and alkalis and to stress-crack formation compared to many amorphous plastics. Ultramid® A3HG6 HR by BASF is processed by injection molding. It is used for applications in automotive cooling circuit.
Ultramid®
Plastics and elastomers supplied by BASF
Ultramid® grades by BASF are a range of polyamides (PA6, PA66, and various co-polyamides PA66/6) and semi-aromatic polyamides used for molding. Used for automotive, electronics, household, photovoltaics, construction and installation, furniture, and mechanical engineering.
Key benefits of Ultramid® brand include:
- High strength and rigidity
- Good thermal stability
- Chemical resistance
- Dimensional stability
- Available in different molecular weights and viscosities
268 Products match your search
Ultramid® BMB
by BASF
- Recently launched
Ultramid® H33 L
by BASF
- Recently launched
Ultramid® Ccycled®
by BASF
- Recently launched
Ultramid® A3K
by BASF
Ultramid® A3EG6
by BASF
Ultramid® A3WG6
by BASF
Ultramid® A3W
by BASF
Ultramid® A3HG7
by BASF
Ultramid® A4H
by BASF
- Sustainable option