Return to supplier page
ECCOH™ LSFOH 5565 by Avient (Formerly PolyOne) is a fire retardant, low smoke and fume non-halogen (LSFOH) grade. It exhibits excellent flexibility and environmental stress cracking resistance (ESCR), withstanding up to 20,000 flex fatigue cycles. It reduces waste by extending cable lifetime. Offers improved fire safety with low corrosiveness & toxicity. It shows excellent water absorption resistance and good temperature resistance over a broad temperature range from -40°C to 80°C. ECCOH™ LSFOH 5565 ?is suitable for manufacturing power and control cable jackets in industrial machinery, heating, air-conditioning systems and plant engineering systems, where resistance to flexing is required at installation or in use. Recommended for dry optical fiber cable as well as indoor & outdoor duct cable applications, where added cold resistance is required. It is also used in telecom, power-to-the antennas and hybrid cables for 5G applications. ECCOH™ LSFOH 5978 UV by Avient (Formerly PolyOne) is a low smoke and fume, non-halogen (LSFOH) grade for cable jackets in industrial and telecom applications. It offers low corrosiveness and toxicity. It enhances the lifetime of cables and reduces waste. It exhibits high flame retardancy (up to CPR class B2ca, s1, a1, d), environmental stress cracking resistance (ESCR) and good char forming properties. Recommended for aerial drop cables, which are often under continuous stress from the clamps that hold them in place. It also shows excellent UV resistance protecting outdoor/indoor cables from varying weather conditions. ECCOH™ LSFOH 5978 UV can be applied to direct buried cables and other duct or indoor applications, which require additional flame & low dripping performance and where cable fixations & movements create extra stress on the cable jacket. ECCOH™ LSFOH 6153 UV by PolyOne is a thermoplastic polyolefin-based low smoke and fume, non-halogenated system. It is designed for optical fiber cables including stranded loose tubes-gel-filled/dry, micro-modules and tight buffer applications-gel-filled/dry. It can run at high processing speeds of up to 1000 m/min with a much lower melting temperature than PBT alternatives and can greatly enhance manufacturing efficiency. This product provides greater resistance to chemicals such as gel water blocking compounds, used to protect optical fibers. ECCOH™ LSFOH 6153 UV is easily colorable and enhances lower wall thickness, reducing raw material used in production. It is optimized for teroson and shows good unigel, excellent teroson and good itcogel migration performance. It reduces migration over time and expands the lifetime value of the cable. It offers high UV resistance, very low shrinkage, increased chemical resistance, lower gel migration and enhanced rheological behavior. It shows compatibility with PolyOne masterbatch. Applicable for dry as well as wet applications, communication and data cables. It complies with IEC 60794, NF XP C93-850-1-1:2020, EN 50289-4-17:2016, ISO 4892:2016 and ST/CNET/5843 (1998). ECCOH™ LSFOH 6154 UV by Avient (Formerly PolyOne) is a thermoplastic polyolefin-based low smoke and fume, non-halogenated system. It runs at high processing speeds of up to 1000 m/min with a much lower melting temperature than PBT alternatives and can greatly enhance manufacturing efficiency. It offers high UV resistance, very low shrinkage, increased chemical resistance, lower gel migration and enhanced rheological behavior. This product also offers greater resistance to chemicals such as gel water blocking compounds, used to protect optical fibers. ECCOH™ LSFOH 6154 UV is easy colorable and enhances lower wall thickness, reducing raw material used in production. It is optimized for unigel and shows excellent unigel & itcogel and good teroson gel migration performance. It reduces migration over time and expands the lifetime value of the cable. It shows compatibility with PolyOne masterbatch. It is designed for optical fiber cables including stranded loose tubes- gel-filled/dry, micro-modules and tight buffer applications -gel-filled/dry. Applicable for dry as well as wet applications, communication and data cables. It complies with IEC 60794, NF XP C93-850-1-1:2020, EN 50289-4-17:2016, ISO 4892:2016 and ST/CNET/5843 (1998).
ECCOH™
Plastics and elastomers supplied by Avient (Formerly PolyOne)
4 Products match your search
ECCOH™ LSFOH 5565
by Avient (Formerly PolyOne)
ECCOH™ LSFOH 5978 UV
by Avient (Formerly PolyOne)
ECCOH™ LSFOH 6153 UV
by Avient (Formerly PolyOne)
ECCOH™ LSFOH 6154 UV
by Avient (Formerly PolyOne)
Showper page