RIBLENE ® FL 34 F is a low density polyethylene (LDPE) grade. Contains slip- (650 ppm) and antiblocking (500 ppm) agents. Exhibits good processability, mechanical- and optical properties. Designed for blown film extrusion applications. Films manufactured by RIBLENE ® FL 34 F are easily heat shrinkable. Recommended for production of low gauge film and shrink film and for blend.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
RIBLENE® FL 34 F properties
Films properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Film Thickness | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 1% Secant Modulus, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| 1% Secant Modulus, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Coefficient of Friction (COF), Dynamic | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Yield, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Yield, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Dart Drop | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Gloss | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Brittleness Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
RIBLENE® FL 34 F Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Blowing Pressure | Visible After Login | Visible After Login | |
| Extrusion Temperature | Visible After Login | Visible After Login | |
| Maximum Mould Temperature | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |